Configuration using KPG-D1/ D1N
0
Assigning functions to the
PF
keys on the transceiver (
Transceiver Settings > Key Assignment)
0
Configuring
16 Zone/Channel Selector
to be enabled or disabled (
Transceiver Settings > Key Assignment >
Top/Side)
0
Configuring
Zone A (Lever A Position)
(
Transceiver Settings > Key Assignment > Zone Select)
0
Configuring
Zone B (Lever B Position)
(
Transceiver Settings > Key Assignment > Zone Select)
Changing the Channel
The channel can be changed using the
Selector
(Portable only) or
PF
keys.
Portable
0
Changing the channel according to the number indicated by the pointer of the Selector
Rotating the
Selector
causes the transceiver to migrate to the channel having the same number specified by the
Selector
. Channels that can be selected are limited to channel 1 to channel 16.
If an unprogrammed channel is selected, “**************” appears on the display.
This behavior can be realized by installing a stopper on the
Selector
, enabling
16 Zone/Channel Selector
, and assigning
the Channel Select function to the
Selector
Available Functions for the Selector
0
Changing the channel regardless of the number indicated by the pointer of the Selector
Rotating the
Selector
clockwise increases the channel number in steps of 1. Rotating the
Selector
counterclockwise
decreases the channel number in steps of 1.
If an unprogrammed channel is selected, the channel will be skipped.
This behavior can be realized by disabling
16 Zone/Channel Selector
and assigning the Channel Up/ Down function to
the
Selector
Available Functions for the Selector
0
Using the PF keys
Pressing the
Channel Up
key increases the channel number in steps of 1. Pressing the
Channel Down
key decreases
the channel number in steps of 1.
If “Channel Up (Continuous)” or “Channel Down (Continuous)” is assigned to the
Channel Up
or
Channel Down
key, the
channel number increases or decreases continuously at 200 ms intervals by pressing and holding the
Channel Up
or
Channel Down
key.
If an unprogrammed channel is selected, the channel will be skipped.
Note
The operation for changing the channel changes depending on the configuration in
Rollover/ End Stop
. (Refer to
Mobile
Pressing the
Channel Up
key increases the channel number in steps of 1. Pressing the
Channel Down
key decreases the
channel number in steps of 1. KCH-20R (Featured Panel) is operated by using the Selector just as Portable.
If “Channel Up (Continuous)” or “Channel Down (Continuous)” is assigned to the
Channel Up
or
Channel Down
key, the
channel number increases or decreases continuously at 200 ms intervals by pressing and holding the
Channel Up
or
Channel Down
key.
If an unprogrammed channel is selected, the channel will be skipped.
Note
The operation for changing the channel changes depending on the configuration in
Rollover/ End Stop
. (Refer to
3 BASIC OPERATIONS
3.5 Changing the Zone-channel
Common FUNC (K, F)/Ver 2.20
41
