Kenwood NX-5800, Общий справочник функций

Страница: 34 / 476

1.2 NX-5700/ NX-5800/ NX-5900
KCH-19 (Basic Panel)
1
2 3
8 9 10 13 11 12
5 4
6
7
Figure 1-2 NX-5700/ NX-5800/ NX-5900 Front View (KCH-19 (Basic Panel))
A
[
P
] (Power) Switch
The transceiver is turned ON when this switch is pressed
and the transceiver is turned OFF when this switch is
pressed again. In this manual, the
[
P
] (Power) switch is
described as the Power switch.
B
[+]/ [-] Key
The preassigned function will be activated or will be
changed to the active state. It is normally used for the
volume adjustment of the speaker.
C
LCD
The channel number and the transceiver’s status appear
on this display.
D
[
G
]/ [
H
] Key
The preassigned function will be activated or will be
changed to the active state. It is normally used to change
the zone or channel.
E
Speaker
The received audio and the Alert Tone sound from the
speaker.
F
Transmit LED/ Busy LED
These LEDs light when the transceiver transmits or
receives a signal.
G
Illumination Sensor
The sensor is for automatically adjusting the luminance
of the LCD depending on the brightness of the
environment.
H
[
T
] (Home) Key
The preassigned function will be activated or will be
changed to the active state. In this manual, the
[
T
]
(Home) key is described as the Home ( [
T
] ) key.
I
[
Q
] (Menu) Key
The preassigned function will be activated or will be
changed to the active state. In this manual, the
[
Q
]
(Menu) key is described as the Menu ( [
Q
] ) key.
The default of the [
Q
] (Menu) key is the Menu function.
If the configuration is changed using KPG-D1/ D1N, a
newly configured function will be activated. Unless the
Menu function is reassigned to the
[
Q
] (Menu) key, Menu
Mode cannot be activated even if the [
Q
] (Menu) key is
pressed.
J
[
O
] (Back) Key
The preassigned function will be activated or will be
changed to the active state. In this manual, the
[
O
]
(Back) key is described as the Back ( [
O
] ) key.
K
[
E
]/ [
F
] Key
The preassigned function will be activated or will be
changed to the active state. It is normally used to change
the zone or channel.
L
[
W
] (Function) Key
The preassigned function will be activated or will be
changed to the active state. In this manual, the
[
W
]
(Function) key is described as the Function ( [
W
] ) key.
M
AUX Key
The preassigned function will be activated or will be
changed to the active state.
1 FUNCTIONS AND PANEL LAYOUT
1.2 NX-5700/ NX-5800/ NX-5900
Common FUNC (K, F)/Ver 2.20 3
CONTENTS INDEX