Note
0
When
Public Address
is enabled, the
PTT
switch can be operated on both Control Heads, but the
PTT
switch pressed
earlier becomes enabled. At this time, while the
PTT
switch of one Control Head is being pressed, nothing behaves even
if the
PTT
switch of the other Control Head is pressed.
0
The volume of an external speaker while
Public Address
is functioning varies in conjunction with the volume of the
Control Head configured in
Master Volume Control
.
0
When an external speaker (KES-3 or KES-5) is not connected to RF Deck 1, the audio of
Public Address
is emitted from
Control Heads. If the external speaker is disconnected from RF Deck 1 while
Public Address
is enabled, the output is
switched to the output of the Control Heads.
Configuring the Output Method of the Received Audio and Beep (Multi RF Deck
Audio Output Type)
Multi RF Deck Audio Output Type
is the function that switches the output method of the received audio and beep in a
Multi RF Deck/ Multi Control Head structure to “Single Audio Output” or “Multi Audio Output”.
The transceiver behaves as follows according to the configuration in
Multi RF Deck Audio Output Type
:
Table 16-10 Multi RF Deck Audio Output Type
Configuration
Description
Single Audio Output
The transceiver emits the received audio and beep of each RF Deck from the speaker of the
Control Head, from the external speaker connected to RF Deck 1, or from both according to the
configuration in
External Speaker
. The received audio and beep does not sound from each RF
Deck at the same time. Only the received audio and beep of a single RF Deck sounds according
to the output priority level.
Because the audio of each RF Deck can be heard without preparing multiple external speakers,
this configuration is used for the operation of Multi RF Deck/ Multi Control Head within a limited
space.
Note
Output priority level is in the order: RF Deck 1, RF Deck 2, RF Deck 3 (highest to lowest).
Multi Audio Output
The received audio and beep of the Selected RF Deck sounds from the speaker of the Control
Head according to the configuration in
External Speaker
. Also, because the received audio and
beep of each RF Deck sounds from the external speaker connected to each RF Deck, the received
audio and beep of multiple RF Decks can be heard at the same time.
Because the received audio and beep of each RF Deck can be heard at the same time from the
external speaker connected to the Control Head and each RF Deck, this configuration is used to
monitor without missing the received audio and beep of all RF Decks.
16 MULTI RF DECK/ MULTI CONTROL HEAD
16.7 Audio Function
Common FUNC (K, F)/Ver 2.20
288
