Configuration using KPG-D1/ D1N
0
Assigning functions to the
PF
keys on the transceiver (
Transceiver Settings > Key Assignment)
0
Configuring
Scan List
(
Transceiver Settings > Scan Information > Scan List > Members)
0
Configuring
Scan List Number
(Trunking Zone) (
Transceiver Settings > Zone/Channel Information > Zone
Information > P25 Trunking)
0
Configuring
Scan List Number
(Conventional Zone) (
Transceiver Settings > Zone/Channel Information > Zone
Information > Conventional)
0
Configuring
Scan List Number
(Channel) (
Transceiver Settings > Zone/Channel Information > Channel Edit >
P25 Conventional)
0
Configuring
Scan Type
(
Transceiver Settings > Zone/Channel Information > Zone Edit)
0
Configuring
“Scan” Displayed
to be enabled or disabled (
Transceiver Settings > Scan Information > General)
Conditions to Activate the Scan (List Scan)
For the transceiver to start the List Scan, 2 or more Zone-channels must be registered as members in a Scan List.
Note
0
A Priority Channel is always registered as a member in a Scan List. However, if “Selected” is configured for the type of
the Priority Channel (
Type
), the selected channel becomes the Priority Channel and target channel for scan, regardless
of the configuration in
Selected Channel Scan
or whether the selected channel is registered as a member in a Scan
List. (Refer to
.)
0
If
Selected Channel Scan
is enabled, the scan can be initiated even if only a single Zone-channel is configured as a
member in a Scan List because the selected channel also becomes the target channel for scan.
Conditions to Resume the Scan (List Scan)
For the transceiver to resume the List Scan, 2 or more Zone-channels to be scanned must be registered as members in a
Scan List.
If the transceiver does not satisfy the conditions to resume the scan, the scan remains paused.
Note
0
If a channel is temporarily excluded from the target channels for scanning by the
Temporary Delete/Add
function, the
channel is not scanned even if the channel is registered as a member in a Scan List.
0
If
Selected Channel Scan
is enabled, the scan can be resumed even if only a single Zone-channel is configured as a
member in a Scan List because the selected channel also becomes the target channel for scan.
Transceiver Behavior in the Case that the Scan Cannot Be Resumed (List Scan)
If the transceiver manually switches during the scan to the zone or channel which does not satisfy the condition to resume
the scan, the transceiver displays the selected channel and the scan remains paused.
If the
PTT
switch is pressed while the condition to resume the scan is not satisfied, the transceiver transmits on Revert
Channel. Upon elapse of the time configured in
Dwell Time
after completion of the transmission, the transceiver reverts to
the selected channel, and the scan does not resume.
6 SCAN
6.3 Scan by Registering Multiple Target Channels for Scan in the List (List Scan)
P25 FUNC (K)/Ver 2.20
202
