manualshive.com logo in svg

Kenwood NX-5000 series, Руководство пользователя

Поделиться
Скачать
Kenwood NX-5000 series Скачать руководство пользователя страница 171

Surveillance Mode

Surveillance Mode

 is the function to continue the Surveillance function as enabled even if the transceiver enters Emergency

Mode while the Surveillance function is enabled.
While the Surveillance function is enabled, the transceiver does not emit a tone or light the backlight even when the
transceiver functions.
The Surveillance function is used when the change of the transceiver status needs to be kept unnoticed, such as while on
a Public Safety operation.
The transceiver behaves as follows according to the configuration in 

Surveillance Mode

:

0

If Surveillance Mode is enabled

Even if the transceiver enters Emergency Mode while the Surveillance function is enabled, the Surveillance function
remains enabled, and the transceiver does not emit a tone and the backlight and LED do not light. The Surveillance
function remains enabled even if the transceiver exits Emergency Mode.

0

If Surveillance Mode is disabled

The Surveillance function is disabled if the transceiver enters Emergency Mode while the Surveillance function is enabled.
The transceiver behaves according to the configurations in Emergency Information when the transceiver is placed in
Emergency Mode. The Surveillance function remains disabled even if the transceiver exits Emergency Mode.

Note

While in Emergency Mode, the Surveillance function cannot be toggled between enabled and disabled by operating the
transceiver.

Configuration using KPG-D1/ D1N

Configuring 

Surveillance Mode

 to be enabled or disabled (

 Transceiver Settings > Emergency Information >

General)

3.6

Other Functions in Emergency Mode

Emergency Channel Lock

 and 

Suspended Power-off

 are other available functions in Emergency Mode.

Emergency Channel Lock

Emergency Channel Lock

 is the function to disable changing a zone or channel while the transceiver is in Emergency

Mode.
If this function is enabled, a zone or channel cannot be changed while the transceiver is in Emergency Mode.
If this function is disabled, a zone or channel can be changed while the transceiver in Emergency Mode is not transmitting.

Configuration using KPG-D1/ D1N

Configuring 

Emergency Channel Lock

 to be enabled or disabled (

 Transceiver Settings > Emergency Information)

3 COMMUNICATIONS IN AN EMERGENCY

3.5 Indication and Sound in Emergency Mode

P25 FUNC (K)/Ver 2.20

151

CONTENTS

INDEX

Содержание NX-5000 series









































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды