Out of Range Indicator/ Out of Range Tone
Out of Range Indicator
and
Out of Range Tone
are functions to notify a user that no available control channel is found
after searching for a control channel.
If
Out of Range Indicator
is enabled and no available control channel is detected after approximately 10 sec of searching,
“Out of Range” appears on the display.
Menu
Zone+
Z o n e 1
T a l k g r o u p 1
O u t o f R a n g e
12 : 34
A
M
If
Out of Range Tone
is enabled and no available control channel is detected after approximately 10 sec of searching, the
Out of Range Tone (1 beep) sounds from the transceiver at 30 sec intervals.
Configuration using KPG-D1/ D1N
0
Configuring
Out of Range Indicator
to be enabled or disabled (
Transceiver Settings > Personal > Personal
Features > P25 Trunking > General)
0
Configuring
Out of Range Tone
to be enabled or disabled (
Transceiver Settings > Personal > Personal Features
> P25 Trunking > General)
WUID Validity Time
WUID Validity Time
is the timer for retaining the validity of WUID assigned from a system when registration is executed.
The transceiver executes registration again if the time configured in
WUID Validity Time
elapses for retaining the validity
of WUID.
Configuration using KPG-D1/ D1N
Configuring
WUID Validity Time
(
Transceiver Settings > P25 Network > Network Options > Timers)
2 P25 TRUNKING SYSTEM
2.4 Control Channel Hunt
P25 FUNC (K)/Ver 2.20
84