12
BASIC OPERATIONS
SWITCHING POWER ON/ OFF
Turn the
Power
switch/
Volume
control clockwise to switch the transceiver power
ON.
• The Power on text appears if the Power on text has been set.
Turn the
Power
switch/
Volume
control counterclockwise to switch the transceiver
power OFF.
ADJUSTING THE VOLUME
Rotate the
Power
switch/
Volume
control to adjust the volume.
Rotate clockwise to increase the volume and counterclockwise to decrease the
volume.
SELECTING A ZONE AND CHANNEL
1
Select the desired zone using the
Selector
(programmed as
[Zone Up/Down]
or
[Zone Select]
) or buttons programmed as
[Zone Up]
/
[Zone Down]
.
• Each zone contains a group of channels.
2
Select the desired channel using the
Selector
(programmed as
[Channel
Up/Down]
or
[Channel Select]
) or buttons programmed as
[Channel Up]
/
[Channel Down]
.
• Each channel is programmed with settings for transmitting and receiving.
• The transceiver may have names programmed for zones and channels.
The zone name and channel name can contain up to 8 characters
respectively. While selecting a zone, the zone name appears for 2 seconds
(if Zone Name Display is set), then channel name appears.
