Tuner
20
Traffic Information (FM only)
You can listen and watch the traffic information
automatically when a traffic bulletin starts.
However, this feature requires a Radio Broadcast
Data System that includes the TI information.
1
Touch
[ ]
on the left side of the screen.
Touch
[
TI
]
.
h
h
Traffic information mode is set.
Ñ
When the traffic bulletin starts
The Traffic Information screen appears
automatically.
Tuner Setup
You can set tuner related parameters.
1
Touch
[
]
.
2
Touch
[ ]
on the left side of the screen.
Touch
[
SETUP
]
.
h
h
Tuner SETUP screen appears.
3
Set each item as follows.
■
[
RDS CT
]
(FM only)
Synchronizing the Radio Data System station
time data and this unit’s clock.
“ON” (Default), “OFF”
■
[
Area Setting
]
The tuner channel interval changes
depending on the area where you use this
unit.
[
North America
]
(Default): Select this when
using in North America. FM/AM intervals
are set to 200 kHz/10 kHz.
[
South America
]
: Select this when using in
South America. FM/AM intervals are set to
50 kHz/10 kHz.
[
Europe
]
: Select this when using in any other
areas. FM/AM intervals are set to 50 kHz/9
kHz.
!B5H-0357-10_JVC_KWM_K_En.indb 20
2020/04/17 16:25
