9
installation
• Ensure the unit is unplugged and empty.
• To take the door off it is necessary to tilt the unit backwards. You should rest the unit
on something solid, e.g. a chair just below the top panel.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit flat as this may damage the coolant system.
• We recommend that 2 people handle the unit during assembly.
• If you want to have the door swing reversed, we recommend that you contact a
qualified technician. You should only try to reverse the door yourself if you believe that
you are qualified to do so.
reversing the door swing
tools required:
Philips style screwdriver / Flat bladed screwdriver / Hexagonal spanner
1. Remove the two screws from the back of the top
cover, then lift the top cover and place it on a padded
surface to prevent from scratching.
2. Remove the four screws (2 from each side). Remove
the upper hinge. Lift the door and place it on a
padded surface to prevent from scratching.
Before transferring the bottom hinge to the
other side, move the bottom hinge pin from
hole 1 to 2. Tighten the pin securely.
3. Lay down the unit. Remove both levelling feet, and
bottom hinge. Swap their position.
①
②
Bottom
hinge pin
KUL55X18_IB_180131_grace.indd 9
31/1/18 2:58 pm
