Kenwood KRF-V7300D страница 34 Скачать руководство пользователя

Страница: 34 / 72

KRF-V9300D/KRF-V8300D/KRF-V7300D

Set

If a message is displayed

If an error or a confirmation message is displayed and
measurement is stopped in the middle, a trouble may be
detected during the measurement. Read the message and take
the proper measure before retrying measurement.

Error message:

Take the measure according to the
message and retry measurement.

Confirmation message: Check the message content. The

operation can be continued without
retrying measurement.

Error messages

"E1 : No Mic" :

The setup microphone is not connected.

➡

Connect the provided setup microphone to the [AUTO

ROOM EQ MIC IN] jack.

"E2 : Phones" :

Headphones are connected.

➡

Unplug the headphones.

"E3 : No Sp L/R" / "E3 : No Sp L" :

One or both of the front speakers are not connected.

➡

Connect the front speakers properly.

"E3 : No Sp SL" / "E3 : No Sp SR" :

One of the surround speakers is not connected.

➡

Connect the surround speakers properly.

"E3 : No Sp SBL" :

One of the surround back speakers is not connected.

➡

If the system is a 7.1-channel system, connect both the

surround back left and right speakers.
If it is a 6.1-channel system, connect the surround back
speaker to the [SURROUND BACK L] terminal.

"E3 : SB w/o S" :

The surround left and right speakers are not connected.

➡

Connect the surround left and right speakers properly.

"E4 : Noisy" :

The measurement environment is too noisy.

➡

Remove the cause of noise before retrying measurement.

"E5 : Bad S/N" :

The measurement environment is too noisy.

➡

Retry measurement. Do not control the speaker volume

during measurement.

"E6 : Far SP" :

The speaker is installed too apart.

➡

Reinstall the speaker.

"E7 : DSP" :

A communication error occurred inside the unit.

➡

Retry measurement. If the same error message

reappears, contact your nearest Kenwood service
counter.

"E8 : Time Out" :

The measurement took too long time due to a certain
cause.

➡

Retry measurement. If the same error message

reappears, contact your nearest Kenwood service
counter.

KRF-V9300D and KRF-V8300D Speaker setup –"Auto Setup"(Auto Room EQ)–

B60-5740-00̲00̲EN.indd 34

08.7.17 3:29:57 PM

Содержание KRF-V7300D









































































Результаты поиска

Содержание KRF-V7300D

Отзывы:

Похожие инструкции для KRF-V7300D

Бренды по названию

Популярные бренды

Kenwood KRF-V7300D, Инструкция по эксплуатации

Результаты поиска

Содержание KRF-V7300D

Отзывы:

Похожие инструкции для KRF-V7300D

Бренды по названию

Популярные бренды