Kenwood KRF-V7300D страница 24 Скачать руководство пользователя

Страница: 24 / 72

KRF-V9300D/KRF-V8300D/KRF-V7300D

Connecting an iPod

The PNC-iP120 (optional) is necessary to connect an iPod to this unit.

For the usable iPod models, see < iPod models usable with this unit>

PNC-iP120 (optional)

AUX

MD/TAPE

VIDEO1

ANTENNA

VIDEO2

AUDIO

DVD/6CH IN

FRONT SPEAKERS (6 – 16 )

AUTO ROOM EQ
MIC IN

VIDEO1 IN

DVD IN

VIDEO

VIDEO1 OUT

SUB WOOFER
PRE OUT

CENTER

SURROUND

FRONT

PLAY IN

REC OUT

PLAY IN

REC OUT

SUB WOOFER

S-VIDE

‒

RED

WHITE

GREEN

SPEAKER A

SPEAKER B

CENTER

GND

FM 75

500mA

iPod

SUR

500mA

iPod

Release buttons

Display when an iPod is connected

When an iPod is connected and the iPod input source is selected,
the display shows the connection status of the iPod.

"Reading" (Blinking):

iPod is being recognized.

"Connected" :

iPod has been recognized. Now this unit can control the
iPod.

"Connect Error" :

The connection is erroneous.

➡

Disconnect the iPod and connect it again.

The iPod in use is not compatible with this unit.

➡

Connect an iPod compatible with this unit by referring

to < iPod models usable with this unit>

The software version of the iPod may be obsolete.

➡

Update the software version of the iPod by referring to

< iPod models usable with this unit>

The battery is low.

➡

Wait until the battery is charged.

"Disconnect" :

The iPod is disconnected.

• Turn this unit OFF (standby mode) before connecting the iPod.

• Insert the iPod connection cable all the way, until it clicks.

• To disconnect the iPod, hold the release buttons on both sides

of the connector of the iPod connection cable and pull the
connector. To prevent damage, do not pull the connector with an
excessive force.

• While the iPod is connected to this unit, the iPod can be

controlled from this unit or the remote control unit provided with
it. When the iPod is connected to this unit, it cannot be used to
control its operations.

B60-5740-00̲00̲EN.indd 24

08.7.17 3:29:44 PM

Содержание KRF-V7300D









































































Результаты поиска

Содержание KRF-V7300D

Отзывы:

Похожие инструкции для KRF-V7300D

Бренды по названию

Популярные бренды

Kenwood KRF-V7300D, Инструкция по эксплуатации

Результаты поиска

Содержание KRF-V7300D

Отзывы:

Похожие инструкции для KRF-V7300D

Бренды по названию

Популярные бренды