9
KIV-700/BT900
■
Key layout
∗
The product can be reset by simultaneously pressing the following three keys: [MENU], [AUD] and [SRC].
■
How to transfer into the test mode
Press and hold the [TEL] or [TI] or [PLAY MODE] and [FAV] keys and reset.
∗
Reset can be made also by turning on the head unit power supply.
■
How to clear the test mode
It is required to clear the test mode under any of the following conditions:
y
Reset
y
Momentary power down detection
y
ACC OFF operation
y
Panel detach operation
■
Initial setting
y
The source when making the transfer shall be STANDBY source.
y
All the TFT LCD turns on when it is white.
y
VOLUME setting shall be 30.
y
CRSC setting shall be ON. (Do not set up to ON/OFF switching.)
y
KEY ON BEEP setting shall be ON regardless of destination of the product.
y
Build-in AUX shall be ON.
y
DSP shall be BYPASS setting (DSP OFF).
y
DISPLAY setting shall be Type-A1. (This is the same as the initial setting for the normal mode)
y
DISPLAY TEXT setting in TUNER source shall be as follows:
K/M type 1st row: Frequency
E type
1st row: PS/Frequency
y
SOURCE SELECT setting shall be mode 2 (Mode in which the source is switched every time when [SRC] key is pressed
brie
fl
y).
y
The illumination settings shall be R255, G255, and B255 (white).
y
AV OUT setting shall be ON.
TEST MODE
SRC
MENU
Play/Pause
AUD
DISP
TEL or TI or PLAY MODE
SEARCH
MODE
FAV