Kenwood KDC-BT752HD, Инструкция по эксплуатации

Страница: 9 / 108

English
9
Adjust [SETTINGS] mode settings
While listening to the radio...
1
Press the volume knob to enter [FUNCTION] mode.
2
Turn the volume knob to select [SETTINGS] , then press to enter.
3
Turn the volume knob to make a selection, then press to confirm.
See table below for selection.
4
Hold to finish the procedure.
Item Selectable setting (Preset: *)
SEEK MODE AUTO1 *:
Automatically search for a station or channel. ;
AUTO2:
Search in the order of the stations in the preset
memory. ;
MANUAL:
Manually search for a station.
AUTO MEMORY YES:
Automatically starts memorizing 6 stations with good reception. ;
NO *:
Cancels (automatic memorizing is
not activated). (Selectable only if
[NORMAL]
is selected for
[PRESET TYPE]
.) (page 5)
RECEIVE MODE
Sets the receive mode of the HD Radio receiver.
AUTO *:
Automatically tunes to analog broadcast when there is no digital broadcast. ;
DIGITAL:
Tunes in to digital
broadcast only. ;
ANALOG:
Tunes in to analog broadcast only.
TAG MEMORY Displays the tag memory usage of the HD Radio receiver.
00 — 50 (Preset: 00): Up to 50 tags can be registered to this unit.
Listening to the other external
components
PAR
iPod
VOICE
TAG
3.5 mm (1/8”) stereo mini plug
(commercially available) Portable audio device
(commercially available)
Preparation :
Make sure
[ON]
is selected for
[BUILT-IN AUX]
. (page 5)
Auxiliary input jack
1
Press SRC to select “AUX”.
2
Turn on the external component and
start playing.
3
Turn the volume knob to adjust the
volume.
B64-4935-00_01_K.indb 9 11/12/21 9:39