Kenwood KDC-BT752HD, Инструкция по эксплуатации

Страница: 24 / 108

24
English
SMS (Short Message Service)
Downloading the SMS
1
Press to enter Bluetooth mode.
2
Turn the volume knob to select
[SETTINGS]
, then press to enter.
3
Turn the volume knob to select
[SMS]
,
then press to enter.
4
Turn the volume knob to select
[SMS
DOWNLOAD]
, then press to enter.
5
Start downloading
■ ■
During downloading: “DOWNLOADING”
is displayed.
■ ■
After completion of downloading:
“COMPLETE” is displayed.
6
Hold to finish the procedure.
■ ■
To cancel the Bluetooth mode, press .
■ ■
The cell-phone must be able to transmit the
SMS using Bluetooth. Setting on the cell-
phone may be required. If the cell-phone
does not support an SMS function, the
SMS download item is not displayed in the
Settings mode.
■ ■
When the SMS is downloaded from the
cell-phone, the unopened messages in the
cell-phone are opened.
■ ■
Up to 149 already read and unread short
messages can be downloaded.
Display the SMS
¤
To prevent car accidents, the driver should
not read the SMS while driving.
When a new message arrives
“SMS RECEIVED” is displayed.
Displaying the SMS
1
Press to enter Bluetooth mode.
2
Turn the volume knob to select [SMS
INBOX] , then press to enter.
3
Turn the volume knob to select a
message.
■ ■
Switches between name, phone number
and message reception date, press
DISP
.
4
Press the volume knob to display the
text.
■ ■
To scrolls the message, turn the volume
knob.
■ ■
To return to the message list, press the
volume knob.
5
Hold to finish the procedure.
■ ■
To cancel the Bluetooth mode, press .
■ ■
The unopened message is displayed at the
beginning of the list. Other messages are
displayed in the order of reception.
Item Selectable setting (Preset: *)
RECONNECT ON *:
Automatically reconnects the selected Bluetooth device when radio wave becomes strong enough,
even after it is disconnected. ;
OFF:
Cancels.
■ ■
When this function is turned ON, the Bluetooth device is reconnected if it has been disconnected by
selecting
[PHONE SELECT]
/
[AUDIO SELECT]
.
BT HF/AUDIO FRONT *:
Outputs audio from the front speakers. ;
ALL:
Outputs audio from the all speakers.
CALL BEEP ON *:
Sets whether to output a beep from the speaker when a call comes in. ;
OFF:
Cancels.
BT F/W UPDATE
Display the firmware version and update the firmware.
MIC GAIN 1 — 20 * — 30: Adjust the sensitivity of the microphone for telephone call or adjusts the voice of the caller.
NR LEVEL –1 — 0 * — +1:
Reduce the noise generated by the surrounding environment without changing the
built-in microphone volume or adjusts the voice of the caller when it is not clear. Setting to “+” increases the
noise reduction.
EC LEVEL –1 — 0 * — +1:
Adjust the level of echo cancellation. Setting to “+” increases the echo cancel reduction.
B64-4935-00_01_K.indb 24 11/12/21 9:39