Kenwood KDC-BT47SD, Инструкция по эксплуатации

Страница: 15 / 21

28
English English
29
CONTENTS
Function settings
1
Press SRC to select a source other than “STANDBY”.
2
Press the volume knob to enter
[FUNCTION]
mode.
3
Turn the volume knob to select
[AUDIO CONTROL]
or
[SETTINGS]
, then press to enter.
4
Turn the volume knob to make a selection, then press to confirm.
■ ■
See table below for selection.
■ ■
Repeat step 4 until the desired item is selected/activated.
■ ■
Press to return to the previous item.
5
Hold to finish the procedure.
[AUDIO CONTROL]
: While listening to any source except in STANDBY state or Bluetooth mode.
Item Selectable setting (Preset: *)
SUB-W LEVEL –15 — 0 * — +15:
Adjusts the subwoofer output level.
BASS LEVEL –8 — 0 * — +8:
Source tone memory: Adjusts the level to memorize in each source. (Before making an
adjustment, select the source you want to adjust.) MID LEVEL
TRE LEVEL
EQ PRO
BASS ADJUST BASS CTR FRQ 60/ 80/ 100 */ 200:
Selects the center frequency.
BASS LEVEL –8 — 0 * — +8:
Adjusts the level.
BASS Q FACTOR 1.00 */ 1.25/ 1.50/ 2.00:
Adjusts the quality factor.
BASS EXTEND ON:
Turns on the extended bass. ;
OFF *:
Cancels.
MID ADJUST MID CTR FRQ 0.5K/ 1.0K */ 1.5K/ 2.5K:
Selects the center frequency.
MID LEVEL –8 — 0 * — +8:
Adjusts the level.
MID Q FACTOR 0.75/ 1.00 */ 1.25:
Adjusts the quality factor.
TRE ADJUST TRE CTR FRQ 10.0K/ 12.5K */ 15.0K/ 17.5K:
Selects the center frequency.
TRE LEVEL –8 — 0 * — +8: Adjusts the level.
PRESET EQ NATURAL */ USER/ ROCK/ POPS/ EASY/ TOP40/ JAZZ/ POWERFUL:
Selects a preset sound mode suitable
to the music genre. (Selects
[USER]
to use the customized bass, middle, and treble settings.)
BASS BOOST B.BOOST LV1/ B.BOOST LV2/ B.BOOST LV3:
Selects your preferred bass boost level. ;
OFF *:
Cancels.
LOUDNESS LOUDNESS LV1 */ LOUDNESS LV2:
Selects your preferred low and high frequencies boost to produce a well-
balanced sound at a low volume level. ;
OFF:
Cancels.
BALANCE L15 — 0 * — R15:
Adjusts the left and right speaker output balance.
FADER R15 — 0 * — F15:
Adjusts the rear and front speaker output balance.
SUBWOOFER SET ON *:
Turns on the subwoofer output. ;
OFF:
Cancels.
DETAILED SET
HPF THROUGH *:
All signals are sent to the front speaker. ;
100/ 120/ 150 (HZ):
Frequencies lower than the specified value are cut off.
LPF
SUBWOOFER THROUGH *: All signals are sent to the subwoofer. ;
85/ 120/ 160 (HZ): Frequencies higher than the specified value are cut off.
SUB-W PHASE REVERSE
(180°)
/ NORMAL
(0°)
*:
Selects the phase angle of the subwoofer output to be in line with the
speaker output for optimum performance. (Selectable only if a setting other than
[THROUGH]
is selected for
[LPF SUBWOOFER]
.)
Item Selectable setting (Preset: *)
SUPREME SET ON *:
Creates realistic sound by interpolating the high-frequency components that are lost in AAC/ MP3/
WMA audio compression. ;
OFF:
Cancels. (Selectable only when playback an AAC/ MP3/ WMA disc or a USB
device, except iPod.) (Selectable only if “CD”/ “USB”/ “SD” is selected as the source.)
VOLUME OFFSET –8 — 0 * — +8 (for AUX) ; –8 — 0 * (for other sources) : Presets the volume adjustment level of each
source. The volume level will automatically increase or decrease when you change the source. (Before making
an adjustment, select the source you want to adjust.)
■ ■
Select a source before making a source tone memory adjustment,
[EQ PRO]
.
■ ■
[SUB-W LEVEL/ LPF SUBWOOFER/ SUB-W PHASE]
is selectable only if
[SUBWOOFER SET]
is set to
[ON]
.
[SETTINGS]
Item Selectable setting (Preset: *)
AUX NAME SET AUX */ DVD/ PORTABLE/ GAME/ VIDEO/ TV:
Selects the desired name for the connected component.
(Selectable only if “AUX” is selected as the source.)
CLOCK
CLOCK ADJUST (For details, see page 6 .)
TIME SYNC ON *:
Synchronizes the Radio Data System station time data and the unit’s clock. ;
OFF:
Cancels.
DISP&KEY
COLOR SELECT VARIABLE SCAN */ COLOR 01 — 24/ USER:
Selects your preferred key illumination color.
Adjusting the RGB values
You can create your own “USER” color (when [COLOR 01] — [COLOR 24] is selected).
1. Press and hold the volume knob to enter the detail color adjustment mode.
2. Press
4
/
¢
to select the color (R/ G/ B) to adjust. Turn the volume knob to adjust the level (0 — 9).
3. Press the volume knob to confirm and exit.
DISP DIMMER ON:
Dims the display illumination. ;
OFF *:
Cancels.
TEXT SCROLL AUTO */ ONCE:
Selects to scroll the display information automatically, or scroll only once. ;
OFF:
Cancels.
BT DVC STATUS
You can display the connection status, signal strength, and battery level of Bluetooth device.
HF-CON:
Connection status for cell-phone. ;
AD-CON:
Connection status for BT Audio. ;
BATT:
Battery level of cell-phone. ;
SIGNAL:
Signal strength of cell-phone.
KEY DIMMER LV1:
Dims the key illumination. ;
LV2:
Dims the key illumination darker than LV1. ;
OFF *:
Cancels.
TUNER SET TI/ NEWS SET/ AF SET/ REGIONAL/ AUTO TP SEEK:
Selectable only if any source other than tuner source is
selected. (For details, see page 8 .)