22
English
English
23
Function settings
1
Press SRC to select a source other than “STANDBY”.
2
Press the volume knob to enter
[FUNCTION]
mode.
3
Turn the volume knob to select
[AUDIO CONTROL/ AUDIO CTRL]
or
[SETTINGS]
, then
press to enter.
4
Turn the volume knob to make a selection, then press to confirm.
■
■
See table below for selection.
■
■
Repeat step 4 until the desired item is selected/activated.
■
■
Press to return to the previous item.
5
Hold to finish the procedure.
[AUDIO CONTROL/ AUDIO CTRL]
: While listening to any source except in STANDBY state or
Bluetooth mode.
Item
Selectable setting (Preset: *)
SUB-W LEVEL
–15 — 0 * — +15:
Adjusts the subwoofer output level.
BASS LEVEL
–8 — 0 * — +8:
Source tone memory: Adjusts the level to memorize in each source. (Before making an
adjustment, select the source you want to adjust.)
MID LEVEL
TRE LEVEL
EQ PRO
BASS ADJUST
BASS CTR FRQ/
BASS C FRQ
60/ 80/ 100 */ 200:
Selects the center frequency.
BASS LEVEL
–8 — 0 * — +8:
Adjusts the level.
BASS Q FACTOR/
BASS Q FCTR
1.00 */ 1.25/ 1.50/ 2.00:
Adjusts the quality factor.
BASS EXTEND
ON:
Turns on the extended bass. ;
OFF *:
Cancels.
MID ADJUST
MID CTR FRQ/
MID C FRQ
0.5K/ 1.0K */ 1.5K/ 2.5K:
Selects the center frequency.
MID LEVEL
–8 — 0 * — +8:
Adjusts the level.
MID Q FACTOR/
MID Q FCTR
0.75/ 1.00 */ 1.25:
Adjusts the quality factor.
TRE ADJUST
TRE CTR FRQ/
TRE C FRQ
10.0K/ 12.5K */ 15.0K/ 17.5K:
Selects the center frequency.
TRE LEVEL
–8 — 0 * — +8:
Adjusts the level.
PRESET EQ
NATURAL */ USER/ ROCK/ POPS/ EASY/ TOP40/ JAZZ/ POWERFUL:
Selects a preset sound mode suitable
to the music genre. (Selects
[USER]
to use the customized bass, middle, and treble settings.)
BASS BOOST
B.BOOST LV1/ B.BOOST LV2/ B.BOOST LV3:
Selects your preferred bass boost level. ;
OFF *:
Cancels.
LOUDNESS
LOUDNESS LV1 */ LOUD LV1 */ LOUDNESS LV2/ LOUD LV2:
Selects your preferred low and high frequencies
boost to produce a well-balanced sound at a low volume level. ;
OFF:
Cancels.
BALANCE
L15 — 0 * — R15:
Adjusts the left and right speaker output balance.
FADER
R15 — 0 * — F15:
Adjusts the rear and front speaker output balance.
SUBWOOFER SET/
SUB-W SET
ON *:
Turns on the subwoofer output. ;
OFF:
Cancels.
Item
Selectable setting (Preset: *)
DETAILED SET/
DETAIL SET
LPF
SUBWOOFER/
LPF SUB-W
THROUGH *:
All signals are sent to the subwoofer. ;
85/ 120/ 160 (HZ):
Frequencies higher than the specified value are cut off.
SUB-W PHASE REVERSE/REV
(180°)
/ NORMAL/NORM
(0°)
*:
Selects the phase angle of the subwoofer output to be in line
with the speaker output for optimum performance. (Selectable only if a setting other than
[THROUGH]
is
selected for
[LPF SUBWOOFER/ LPF SUB-W]
.)
SUPREME SET
ON *:
Creates realistic sound by interpolating the high-frequency components that are lost in AAC/ MP3/
WMA audio compression. ;
OFF:
Cancels. (Selectable only when playback an AAC/ MP3/ WMA disc or a USB
device, except iPod.) (Selectable only if “CD”/ “USB” is selected as the source.)
VOLUME
OFFSET/
VOL OFFSET
–8 — 0 * — +8
(for AUX)
; –8 — 0 *
(for other sources)
:
Presets the volume adjustment level of each
source. The volume level will automatically increase or decrease when you change the source. (Before making
an adjustment, select the source you want to adjust.)
■
■
Select a source before making a source tone memory adjustment,
[EQ PRO]
.
■
■
[SUB-W LEVEL/ SUBWOOFER SET/ SUB-W SET/ LPF SUBWOOFER/ LPF SUB-W/ SUB-W PHASE]
is selectable only if
[SWITCH
PREOUT/ SWITCH PRE]
is set to
[SUB-W]
. (
)
■
■
[SUB-W LEVEL/ LPF SUBWOOFER/ LPF SUB-W/ SUB-W PHASE]
is selectable only if
[SUBWOOFER SET/ SUB-W SET]
is set to
[ON]
.
[SETTINGS]
Item
Selectable setting (Preset: *)
AUX NAME SET/
AUX NAME
AUX */ TV/ VIDEO/ GAME/ PORTABLE/ DVD:
Selects the desired name for the connected component.
(Selectable only if “AUX” is selected as the source.)
CLOCK
CLOCK ADJUST/
CLOCK ADJ
(For details, see
.)
TIME SYNC
ON *:
Synchronizes the Radio Data System station time data and the unit’s clock. ;
OFF:
Cancels.
DISPLAY
DISP DIMMER ON:
Dims the display illumination. ;
OFF *:
Cancels.
TEXT SCROLL
AUTO */ ONCE:
Selects to scroll the display information automatically, or scroll only once. ;
OFF:
Cancels.
BT DVC STATUS/
DVC STATUS
You can display the connection status, signal strength, and battery level of Bluetooth device.
HF-CON:
Connection status for cell-phone. ;
AD-CON:
Connection status for BT Audio. ;
BATT:
Battery level of cell-phone. ;
SIGNAL:
Signal strength of cell-phone.
TUNER SET
TI/ NEWS SET/ AF SET/ REGIONAL/ AUTO TP SEEK/ ATP SEEK:
Selectable only if any source other than tuner
source is selected. (For details, see
