Kenwood HM-982RW Скачать руководство пользователя страница 41

Страница: 41 / 88

Recording on TAPE

Knowledge section

Preparation section

Application section

Basic section

5. Make the preparations for recording.

TUNER (Broadcasts) : Select a station
CD

: Enter pause mode at the beginning of the track

to be recorded.

CDR

: Enter pause mode at the beginning of the track

to be recorded.

AUX (Auxiliary analog source)

Make preparation for tuning or playback.

6. Start recording.

TUNER (Broadcasts) : Press the TUNER/BAND key
CD (CD player)

: Press the CD

key

CDR (CD recorder)

: Press the CD-R

key

AUX (Auxiliary analog source)

: Press the AUX/D-AUX key repeatedly until "AUX"

is displayed.

The input level can be varied only when the

"AUX"

(auxiliary analog source)

input is selected. Adjust the input level from the auxiliary source as required
if it is too small or too large. (

AUX Input

Rec Gain

)

Select the source to be recorded.

When CD has been selected.

TAPE REC

When

CD-R

is pressed, playback will

start when a disc already has been inserted. Press
the

STOP

key to stop it.

DECK

is displayed and the

TAPE REC

indicator starts to light steadily.

Recording stops automatically when the tape side(s) to be recorded have been fully
recorded.

Stop the recording

If the key is pressed during recording from a CD, the CD
playback also stops.

If the key is pressed during recording from CDR, the CDR
playback also stops.

The same function is also available using the

STOP

key on

the remote control unit.

Press the

TAPE REC

key during recording. It stops after

leaving a non-recorded blank of 4 seconds. (Press the key
again to resume recording.)

The

DECK

display blinks and the

TAPE REC

indicator also

blinks.

Pause the recording (Main unit only)

TAPE REC

When the preparation is complete, press the TAPE REC key.
(this starts actual recording)

Play (or tune) the music source to be recorded.

SINGLE

C D 0 1

0 : 0 0

The selected recording
source is displayed.

The source connected to the DIGITAL
IN OPTICAL jack cannot be recorded
onto tape. To record an external
source on tape, connect the source
component's output to the AUX IN
jacks and select the "AUX" input
source.

If you want to also record the input on a CD-R/RW at the same time, press the

CD-

R REC

key in step

, wait until the blinking rate of the

CD-R REC

indicator slows

down, then press the

CD-R REC

key again.

Lights

Содержание HM-982RW

























































































Результаты поиска

Содержание HM-982RW

Отзывы:

Kenwood HM-982RW, Инструкция по эксплуатации, Страница: 41 / 88

Результаты поиска

Содержание HM-982RW

Отзывы: