Kenwood HM-383MD Скачать руководство пользователя страница 81

Страница: 81 / 84

Knowledge sections

Important Items

Symptom

Cause

Symptoms related to MD standard

"DISC FULL" is displayed while the disc still has
a remaining recordable time.

The possible recording time does not increase
even when a short track is erased.

Tracks can not be connected.

The total of the recorded time and remain-
ing recording time does not match the to-
tal recording time of the MD (60, 74 or 80
minutes).

When search is performed in a track which has
been compiled by editing, the sound is some-
times interrupted.

The track numbers are not assigned correctly.

“READING” is displayed for an abnormally long
time.

The time display becomes inaccurate with a
monaurally recorded disc.

Input of 1792 title characters is not possible.

More than 255 tracks (track No. 256 or more) cannot be re-
corded. (There may be also cases in which recording is impos-
sible while the track number is less than 256.)
In such a case, the REMAIN time display shows "

0:00

When the remaining time of the entire disc is less than 12 sec,
the remaining time indication on the display becomes "

0:00

When the total time of the deleted tracks exceeds 12 sec, the
display changes to the recordable time.*1

When a short track is deleted on a repeatedly edited disc, the
remaining time may not increase.

Connection of the track resulting from edit processing may not
be possible.

It is not permitted to combine two tracks which are recorded in
different recording modes.*2

As the MD is recorded based on minimum recording units of 2
seconds, the consumed disc space may not coincide with the
displayed time information.*3

This derives from the restriction in the MD system standard and
not a malfunction.

Depending on the contents of the recorded source (CD etc.), the
track numbers may not be assigned correctly.

When a new recordable MD (with nothing recorded) is inserted,
"

READING

" is displayed longer than usual.

Monaural recording and stereo recording are executed according
to different formats. This is not a malfunction.

The title recording area is used in units of 7 characters, so that
input of 1792 characters may not be possible.

Load a prerecorded disc or playback-only disc.

Change the position of the write protect tab to the write position
or use a recordable disc.

Set the input selector to the source to be recorded.

Adjust the AUX input level.

The recording level is not set properly (when the AUX input is
recorded).
Adjust the AUX input level.

Install the unit at a position apart from an electric appliance or TV set.

Sound is not output even when the play key
is pressed.

Recording is not possible

Recording level is too low. (when the AUX in-
put is recorded).

Sound is distorted.

Noise is noticeable.

Remedy

Symptom

MD recorder section (other symptoms)

*1. When the recording mode is STEREO (24 sec. when it is LP2 or MONO, 48 sec. when it is LP4).

*2. STEREO, LP2, LP4 and MONO modes.

*3. When the recording mode is STEREO (4 sec. when it is LP2 or MONO, 8 sec. when it is LP4).

In case of difficulty

Содержание HM-383MD





















































































Результаты поиска

Содержание HM-383MD

Отзывы:

Kenwood HM-383MD, Инструкция по эксплуатации, Страница: 81 / 84

Результаты поиска

Содержание HM-383MD

Отзывы: