58
MD Edit Functions
Application section
E R A S E
?
Select “
3
ERASE ?”.
Execute the track erasure operation.
1
Press the TRACK EDIT key repeatedly until
"
3
ERASE ?" is selected. (Pressing the key
in the middle of playback initiates pause.)
2
Set it.
3
Press the SET key again.
Play the track to be erased.
Execute operation in play or pause mode.
The following procedure shows you how to erase a single track which is being played. After the track has
been erased, the track numbers after it will be adjusted automatically. Be careful in using this operation
for a track may sometimes be unable to be recovered once it has been deleted.
TRACK EDIT
SET
1
2
3
ENTER
÷
To cancel the operation in the middle, press the
TRACK EDIT
key any time before step
3
.
Display after execution
"EDIT NOW"
=
"COMPLETE !"
(When editing is completed successfully)
"EDIT NOW"
=
"CAN' T EDIT !"
(When editing is impossible)
Each press switches the operation.
1
"
3
DIVIDE
?"
2
"
3
COMBINE ?"
3
"
3
ERASE
?"
4
"
3
MOVE
?"
5
The "
MD-EDIT
" indicator is turned off
(Cancel MD edit mode)
SET
After editing, eject and remove the mini disc.
4
The MD editing is established finally at the mo-
ment the MD disc is ejected. To cancel the edit-
ing contents, perform the operation described in
"To delete the edited contents (EDIT CANCEL)"
before ejecting the disc.
ˆ
0
MD
Information is
being written.
Mini Disc has
been ejected.
M D W R I T I N G
E J E C T
Do not turn power off or apply shock or impact while
"MD WRITING" is displayed. If the power cord is un-
plugged before "MD WRITING" disappears, the re-
corded or edited data will be lost.
Erasing a single track
(ERASE)
Before starting MD editing, be sure to cancel the pro-
gram mode by pressing the PGM key in stop mode.