Kenwood DRV-A501W, Инструкция по эксплуатации

Страница: 22 / 73

20
- Select the Speed Unit
- Set Wireless Link Password
TIP:
You can reset the settings either by operating inside of the SETUP MENU, or by
restoring defaults.
You can switch the capitalization by Protect button when you set the Wireless Link
password.
From now on, the device will automatically turn on and start recording once power
has been made available from the 12 V outlet. Just start the vehicle and start driving!
- If there is no 12 V outlet or cigar lighter socket for your vehicle, use the included USB
power cord.
- DO NOT wire the device directly to the car cigar lighter socket or any 12 V outlet.
Doing so will result in permanent damage to the device.
- The device has a hardwire kit CA-DR1030(optional accessory)
that will directly connect to your vehicle’s fuse box. This will allow you to have your
12 V outlet available for other use.
Please read carefully and follow the instructions below to help you operate the device
safely.
Select Speed Units
Press OK to continue.
MPH
KMH
Set Wireless Link Password
Press OK to continue.
1 2 3 4 5 6 7 8