10
How to Wire
Before performing the connection work, first check that the engine key
is removed and then be sure to disconnect the negative terminal of the
battery to prevent a short accident.
CAUTION
Power cord for Dashboard Camera (accessory)
Ground cord (Black)
Connect to a metal part of the vehicle (part of the chassis with an electrical
connection to the negative side of the power supply).
Ignition key switch
Fuse
Battery
Main fuse
GND
Accessory cord (Red)
Connect to a power supply that can
be turned on and off with the switch.
Battery cord (Yellow)
Connect to a power supply with a voltage always applied
regardless of whether or not the engine key is on or off at
a point after the power has passed through the main fuse.
Accessory power supply
Fuse (2 A)
Dashboard Camera
Connect the Dashboard Camera and power cord.
Cord length (3.5 m)
ACC
BATT