Kenwood DNX8160DABS, Инструкция по эксплуатации

Страница: 86 / 117

Controlling Audio
85
3 way speaker system
setup (DNX8160S)
Select the appropriate crossover network
mode according to the speaker system
(2-way speaker system or 3-way speaker
system).
1
Press the <HOME> button.
2
Touch [ ].
3
Touch [STANDBY].
4
Press the <
G
> button and the <NAV>
button for 1 second at the same time.
Speaker system select screen appears.
5
Select the crossover network mode.
A confirmation screen appears.
6
Touch [Yes].
NOTE
• When the 3-way speaker system is selected, the
following functions are disabled.
–Zone Control
–Fader of Controlling General Audio
–Front focus of Listening Position/ DTA
–Front All of Listening Position/ DTA
–Select the speakers to output the sound from
cell-phone of Blutooth HF/Audio
–Beep of User Interface Setup
• Connecting 3-way speakers with the 2-way mode
selected can break the speakers.
Controlling General Audio
1
Press the <MENU> button.
Popup menu appears.
2
Touch [Audio].
Audio screen appears.
3
Touch [Fader / Balance].
Fader / Balance screen appears.
4
Set each item as follows.
Fader / Balance
Adjust the volume balance around the
touched area.
[
C
] and [
D
] adjust the right and left volume
balance.
[
R
] and [
S
] adjust the front and rear volume
balance.