Kenwood DNX7100 - Navigation System With DVD player, Руководство пользователя

Страница: 20 / 155

EN-1 DNX7100 GPS Navigation Instruction Manual
t
he
M
aP and
o
ther
t
ooLs
English
Trip Computer
The Trip Computer indicates your current speed and
provides helpful statistics about your trip.
To view the Trip Computer, select Trip Computer, select
Speed
or
Arrival
on the map. Or, from the Menu page, touch Tools >
Navigation > Trip Computer .
Total
distance
traveled
(odometer)
Current
direction
of travel
Current speed
Distance to your final
destination
Touch Reset Trip to reset all information on the Trip
Computer. To reset the Maximum Speed, touch
Reset
Max .
Turn List
The Turn List displays a list of turn-by-turn instructions
for your entire route as well as arrival information.
While navigating a route, touch the green text bar on the
map page to open the Turn List. Or, from the Menu page,
touch Tools > Navigation > Turn List .
Direction of this turn
Distance to this turn
Turn directions
Touch View All to see all the turns in the route. Touch
and to scroll through the list.
Touch a turn to see the turn on a map (the Next Turn
page). Touch and to scroll through all the
turns in the route. Touch and to zoom in and out
of the turn on the map.
GPS Info Page
From the Menu page, touch the signal strength bars in
the upper left corner to view the GPS Info page. Or, from
the Menu page, touch
Tools
>
Navigation
>
GpS Info
.
Sky view
Satellite signal
strength bars
The sky view shows the satellites you are receiving. The
satellite signal strength bars indicate the strength of each
satellite you are receiving. A solid bar indicates the GPS
satellite is ready for use.
GPS Settings
From the Menu page, touch
Settings
>
General
>
GpS
.
You can also access the GPS Settings by touching the
GpS Settings button on the GPS Info page.
Use Indoors
—touch
Yes
to turn the GPS receiver off.
Set position —set your position, if Use Indoors is
enabled. Select your location on the map and touch
oK
.
WAAS/EGNoS —disable and enable WAAS/EGNOS.
WAAS and EGNOS are systems of satellites and ground
stations that provide GPS signal corrections, giving you
even better position accuracy. To learn about WAAS and
EGNOS, visit www.garmin.com/aboutGPS/waas.html.
190-00770-00_0A.indb 12 1/11/2007 5:38:01 PM