Kenwood DNX5380, Инструкция по эксплуатации

Страница: 61 / 107

60 60
Return to the Top page
Bluetooth Operation
Muting Audio Volume upon Reception
of Phone Call
(DNX5380 and DNX5380M only)
When a call is received or you answer a call,
the Call Interrupt screen appears and system
is paused.
The system resumes playing automatically
when the call ends and hang up the phone.
NOTE
• To use the Mute feature, you need to hook up the
mute wire to your telephone using a commercial
telephone accessory. See “Connection” (P.29) in
Quick Start Guide.
Call waiting
If you receive a call during another call, you
can answer it with the current call suspended
or switch between the current call and
waiting call.
Answer the new incoming call
Touch [ ]. The current call is kept suspended.
Switch between the current and waiting call
Touch [ ] again.
Each time you touch [ ], the calling party is
switched.
Terminate the current call
Touch [ ].
The call switches to the waiting one.
Bluetooth Setup
You can register PIN code, select the device
to connect, and perform output setup.
1
Press the <TEL> button.
Hands Free screen appears.
2
Touch [BT SETUP].
Bluetooth SETUP screen appears.
See the following section for each setting.
• Register the PIN code (P.61)
• Select the unit to connect (P.54)
• Set up output (P.61)