Kenwood DNX5380, Инструкция по эксплуатации

Страница: 52 / 107

51
Return to the Top page
Radio, TV
5
Set each item as follows.
NEWS
Sets a news bulletin interrupt time. Default is
“OFF.”
AF
When station reception is poor, automatically
switches to the station that is broadcasting
the same program over the same Radio Data
System network. Default is “ON.”
Regional
Sets whether to switch to the station only
in the specific region using the “AF” control.
Default is “ON.”
Auto TP Seek
When traffic information station reception is
poor, automatically searches for a station that
can be received better. Default is “ON.”
Language Select
Selects a display language for the PTY function.
Antenna Control SETUP
Allows you to turn off the Radio Data System
function to prevent the motor-driven antenna
from extending. Default is “ON.”
TV Setup
You can set the TV signal receiving areas.
NOTE
• Each operation in this section can be started from
the Top Menu screen. For details, see
Operating
With The Top Menu Screen (P.16)
.
1
Touch [ ] in the control screen.
Multi function menu appears.
2
Touch [SETUP] in the multi function
menu.
SETUP Menu screen appears.
3
Touch [Source].
Source SETUP Menu screen appears.
4
Touch [TV SETUP] in the list.
TV SETUP screen appears.
Continued