Kenwood DNX4310DAB, Инструкция по эксплуатации

Страница: 34 / 55

66 66 67
Return to the Top page
Bluetooth Operation
Return to the Top page
Bluetooth Operation
Setting up the Hands-Free
phone
1
Touch [TEL SETUP] in the Hands Free
screen.
Hands Free SETUP screen appears.
2
Set each item as follows.
Auto Response*
1
Sets an automatic response time to pick-up an
incoming call.
OFF (Default) : Automatic response is not
available.
0-99 : Set calling ring time (second).
SMS Receive Beep
Select whether to beep at an incoming SMS.
ON (Default) : Beeps.
OFF : Not beeps.
Phone Information Use
Sets whether to download phonebook for
outgoing, incoming and missed calls list.
ON (Default) : Yes.
OFF : No.
SMS Use
Select whether to use SMS.
ON (Default) : Uses SMS.
OFF : Not uses SMS.
Sort Order
Sets how to arrange the cell-phone
phonebook.
First: Arranges in the order of first name.
Last (Default): Arranges in the order of last
name.
Echo Cancel Level
Adjusts the level of echo cancellation.
Default is “0”.
Microphone Level
Adjusts the sensitivity of the telephone
microphone. Default is “20”.
Noise Reduction Level
Reduces the noises generated by surrounding
environment without changing the
microphone volume. Use this setting when the
voice of caller is not clear. Default is “0”.
[Restore]
Resets the settings to the default settings.
*1 Either the time interval for automatic
answer set on this unit or the time interval
set on the cell-phone, whichever is shorter
takes effect.
SMS (Short Message Service)
You can use SMS function.
1
Touch [SMS] in the Hands Free screen.
SMS Select screen appears.
2
Select desired function from the list.
[Create Message]
Creates a message.
For details, see
Creating a new message
(P.68) .
[Received Message List]
Displays the received message list.
[Sent Message List]
Displays the sent message list.
[Draft]
Displays the newest draft message. This key
becomes active when any message has been
created after turning power on.
[Download]
Retrieves message.
Operations in the message list screen
Calls the number in the message
Select desired message from the message list.
Displays message
Touch [DISP] to display the selected message.
Create a return message
Touch [SMS].