88
88
89
R
emote Controller
This unit can be operated using the remote controller.
For DNX531VBT and DNX531VBTM the remote controller is supplied with the unit.
For DNX4310DAB the remote controller is the optional accessory (KCA-RCDV331).
2
CAUTION
• Put the remote controller in a place where it will not move during braking or other operations. A
dangerous situation could result, if the remote controller falls down and gets wedged under the
pedals while driving.
• Do not leave the battery near fire or under direct sunlight. A fire, explosion or excessive heat
generation may result.
• Do not recharge, short, break up or heat the battery or place it in an open fire. Such actions may cause
the battery to leak fluid. If spilled fluid comes in contact with your eyes or on clothing, immediately
rinse with water and consult a physician.
• Place the battery out of reach of children. In the unlikely event that a child swallows the battery,
immediately consult a physician.
Battery Installation
If the remote controller operates only over shorter distances or does not operate at all, it is
possible that the batteries are depleted.
In such instances, replace the both batteries with new ones.
1
Insert two “AAA”/“R03”-size batteries with the and poles aligned properly,
following the illustration inside the case.
Switching the operation mode
The functions operated from the remote
controller differ depending on the position
of the mode switch.
DVD
T V
NAV
AUD
•
•
•
•
AUD mode
Switch to this mode when controlling a
selected source or tuner source, etc.
DVD mode
Switch to this mode when playing a disc
media including DVD, VCD, and CD.
TV mode
Switch to this mode when controlling TV.
NAV mode
Switch to this mode when controlling
navigation function.
NOTE
• When controlling a player that is not integrated in
the unit, select “AUD” mode.
Direct search mode
Using the remote controller, you can jump
directly to the desired file, track chapter, etc.
with entering the number corresponding to
the content.
NOTE
• This operation cannot be performed for USB
device and iPod.
1
Press the <#BS> button several times
until the desired content appears.
The available contents are different
depending on the source.
DVD
Title number/Chapter number/Play time/Item
number*
* You may not be able to use this function with
some discs or scenes.
VCD 1.X and 2.X (PBC OFF)
Track number
VCD 2.X (PBC ON)
Scene number/number
Music CD
Track number/Play time
Audio files
Folder number/File number
Radio
Frequency value
2
Enter the number of the content
you want to play using the numeric
keypad.
3
For DVD or VCD, press the <ENTER>
button.
For music CD or audio files, press the
<POSITION> button.
For radio, press the <
2
> or <
3
>
button.
The content you entered is played.
Functions Of The Remote Controller Buttons
Содержание DNX4310DAB
Страница 55: ......
