Kenwood DNX317BTS, Инструкция по эксплуатации

Страница: 59 / 101

Other External Components
59
English
Other External Components
View Camera
NOTE
• To connect a camera, see
P.81
.
• To use a rear view camera, a REVERSE lead
connection is required.
(P.80)
• The view of the front view camera or dashboard
camera varies depending on the setting of
[
Dashboard Camera /Front Camera
]
.
• If
[
R-CAM Interruption
]
is set to on, the camera
screen is displayed when you shift the gear to the
reverse (R) position.
Ñ
Display the camera screen
1
Press the
[
MENU
]
button.
h Popup menu appears.
2
Touch
[
Camera
]
.
h View camera screen appears.
3
Adjust each item as follows.
2
3
4
1
1
Switching the View Camera
Touch to change the front view camera [1] or
dashboard camera
[2]
and rear view camera.
2
Camera off
Touch to exit the camera screen.
3
Switching the Guideline
Touching each time turns on or off the
guideline. Available when
[
Rear Camera
]
is
set to
[
CMOS 3-Series Camera
]
.
4
Switching the Angle
Touching each time changes camera angles:
Available when
[
Dashboard Camera /
Front Camera
]
is set to
[
CMOS 3-Series
Camera
]
.
• [1] Only for
•
[2]
Only for
Ñ
Camera Setup
1
Press the
[
MENU
]
button.
h Popup menu appears.
2
Touch
[
SETUP
]
.
h
SETUP Menu screen appears.
3
Touch
[
Camera
]
.
h Camera screen appears.
4
Set each item as follows.
■
Rear Camera ( )
CMOS 3-Series Camera
: Select this when
the CMOS-3xx series with ID 1 set is
connected.
Other
(Default): Select this when the other
camera is connected.
■
R-CAM Interruption
ON
: Displays the picture from the rear view
camera when you shift the gear to the
reverse (R) position.
OFF
(Default): Select this when no camera is
connected.
■
R-CAM for Car interface
ON
: Select when you connected an external
system unit. Neither buttons nor titles are
displayed.
OFF
(Default): Select when you connected a
rear camera.