Kenwood DNR3190BTS, Инструкция по эксплуатации

Страница: 82 / 117

Controlling Audio
81
English
Controlling Audio
You can adjust various settings such as audio
balance or subwoofer level.
1
Press the
[
MENU
]
/
[ ]
button.
h h Popup menu appears.
2
Touch
[
Audio
]
.
See the following section for each setting.
• Set up speaker / X’over (P.82)
• Controlling equalizer (P.84)
• Set listening position / DTA (P.88)
• Controlling general audio (Fader /
Balance) (P.84)
• Set volume offset (P.85)
• Performing zone control (P.86)
• Set sound effect (P.87)
• Memory/recall the audio settings
(P.89)
3-way speaker system setup
(Except DNX419DABS)
Select the appropriate crossover network
mode for the speaker system used (2-way or
3-way speaker system).
1
Press the
[
HOME
]
/
[ ]
button.
h h
HOME screen appears.
2
Touch
[ ]
.
h h Source selection screen appears.
3
Touch
[
STANDBY
]
.
4
Press the button
1
followed by the
button
2
for 1 second at the same time.
DNX9190DABS / DNX7190DABS
2 1
DNX5190DABS DNR4190DABS /
DNR3190BTS
2
1
2
1
h h Speaker system select screen appears.
5
Select the crossover network mode.
h h
A confirmation screen appears.
6
Touch
[
Yes
]
.
NOTE
• When the 3-way speaker system is selected, the
following functions are disabled.
– Front focus of Listening Position / DTA
– Fader for Controlling General Audio
– Zone Control
– Selection of the speakers to output sound from
the cell-phone of Bluetooth HF/Audio
– Beep for User Interface Setup
• Connecting 3-way speakers with the 2-way mode
selected can break the speakers.
Autogoods “130”
130.com.ua