Kenwood DNR3190BTS, Инструкция по эксплуатации

Страница: 76 / 117

Setup
75
English
4
Set each parameter as follows.
■ [
Small Audio Text
]
Change the text size for the source control
screen.
[
ON
]
(Default): Change the text size smaller.
[
OFF
]
: Cancel.
■
[
Steering Remote Controller
]
Sets the desired function in the steering
remote controller. (Contact your KENWOOD
dealer for details.)
■
[
Beep
]
(Except DNX9190DABS)
Turn the key touch tone on or off.
Default is “ON”.
■ [
Beep Volume
]
(DNX9190DABS)
Set the sound volume of the key touch tone.
"0" (Off ) – "3" (Default) – "5"
■ [
Widget SETUP
]
Set up the widget displayed on the Home
screen.
(P.27)
■ [
Vehicle Adaptor Information
]
(DNX9190DABS / DNX7190DABS /
DNX5190DABS) *
1
Displays the vehicle information.
This function requires a commercial adaptor.
Consult your KENWOOD dealer for details.
■ [
Beep for Parking distance control
]
(DNX9190DABS / DNX7190DABS /
DNX5190DABS) *
1
Sets whether to generate a warning tone
when the onboard proximity sensor detects
a human or object.
Consult your KENWOOD dealer for details.
■ [
Parking Distance Display
]
(DNX9190DABS / DNX7190DABS /
DNX5190DABS) * 1
You can display information about obstacles
around the car.
[
ON
]
: Always displays information.
[
Dyn.
]
(Default): Displays information when
the sensor detects obstacles.
[
OFF
]
: Cancels.
This function requires a commercial adaptor.
Consult your KENWOOD dealer for details.
■
[
Parking Distance Position
]
(DNX9190DABS / DNX7190DABS /
DNX5190DABS) *
1
Select where information about obstacles is
displayed on the screen (left or right).
“Left”/“Right” (Default)
This function requires a commercial adaptor.
Consult your KENWOOD dealer for details.
■ [
Language Select Mode
]
Selects the mode to select a language.
[
Easy
] (Default): Selects a language easily.
[
Advanced
]
: Allows you to select languages
for respective items.*
2
■ [
Language Select
]
Select a language.
■ [
Touch Panel Adjust
]
(Except DNX9190DABS)
Adjust the sensing position of the touch
panel.
(P.76)
■ [
Time Format
]
Select the time display format.
"12-Hour"/"24-Hour" (Default)
■ [
Clock
]
[
NAV-SYNC
]
(Default): Synchronizes the clock
time with navigation GPS data.
[
Manual
]
: Set the clock manually.
■ [
Time Zone
]
If you have selected [
Manual
] for Clock,
select the time zone.
■ [
Clock Adjust
]
If you select
[
Manual
]
for Clock, adjust the
date and time manually.
(P.76)
*1 This setting is available when a
commercial adaptor is connected.
*2 If you select
[
Advanced
]
for Language
Select Mode, the following screen
appears.
Autogoods “130”
130.com.ua