![Kenwood DNN9350BTM Скачать руководство пользователя страница 125](http://html.mh-extra.com/html/kenwood/dnn9350btm/dnn9350btm_instruction-manual_22273125.webp)
124
Ñ
DSP select
You can select whether using DSP (Digital
Signal Processor) System.
1
Touch [Bypass] or [Through] of [DSP
Select] in the Audio SETUP screen.
Bypass
There is no effect by DSP.
Through
There is an effect by DSP.
NOTE
• When the mode is set to [Bypass], DSP System
cannot be adjusted.
Controlling General Audio
1
Touch [
] on any screen.
2
Touch [Audio].
Audio screen appears.
3
Touch [Audio Control].
4
Set each item as follows.
Fader # / Balance #
Adjust the volume balance around the
touched area.
[
C
] and [
D
] adjust the right and left volume
balance.
[
R
] and [
S
] adjust the front and rear volume
balance.
Volume Offset*
Finely adjust the volume of the current source
to minimize the difference in volume between
different sources.
Subwoofer Level
Adjust the subwoofer volume. This setting is
not available when subwoofer is set to “None”.
See
Bass Boost
Set the amount of bass boost among “OFF”/
“Level1”/ “Level2”/ “Level3”.
* If you have increased the volume first, then
Содержание DNN9350BTM
Страница 8: ...7 Return to the Top page How To Read This Manual ...
Страница 32: ...31 Return to the Top page Network Setup ...
Страница 110: ...109 Return to the Top page Camera Control ...
Страница 153: ......