Kenwood DNN770HD, Быстрый старт

Страница: 116 / 172

146 147
Return to the Top page
Audio Setting Up
Return to the Top page
Audio Setting Up
Zone Control
You can select different sources for both
front and rear positions in the vehicle.
1
Touch [Zone Control].
Zone Control screen appears.
2
Touch [Dual Zone].
3
Set each source as follows.
[ D ] (Front Source, Rear Source)
Select the audio source for each.
[ S ], [ R ] (Rear VOL.)
Adjust the rear channel volume.
[Single Zone]
Touch to turn off the dual zone function.
NOTE
• When the rear speaker sound is switched, the
audio source that is output at the AV OUTPUT
terminal is also switched to the same source.
• When the dual zone function is set to on, the
following functions are not available.
–Output from the subwoofer
–Subwoofer Level/Bass Boost (P.142)
–Equalizer Control/Sound Effect/Listening
Position
(P.143, 145, 148)
–DSP Bypass Control/Speaker Setup/Car Type
Setup (P.141, 139, 140)
Ñ
Highway sound setting
You can boost a certain range of sound that
becomes hard to hear due to road noise.
1
Touch [Highway Sound] in the Sound
Effect screen.
Highway Sound screen appears.
2
Select the boost level from among
[High], [Low], and [OFF].
Ñ
Elevation
You can raise the sound position heard from
the speakers virtually.
1
Touch [Elevation] in the Sound Effect
screen.
Elevation screen appears.
2
Select Elevation level from [High],
[Low], and [OFF].
Ñ
Realizer and Supreme
You can restore the sound lost due to audio
compression to a realistic sound.
1
Touch the screen in the Sound Effect
screen.
Realizer
Realizer is sound enhancement and boosting
low frequencies (bass boost).
Select the level from “OFF”/ “Level1”/ “Level2”/
“Level3”.
Supreme
Turns ON/OFF the Supreme function.
Technology to extrapolate and supplement
with proprietary algorithm, the high-frequency
range that is cut off when encoding.
This function works on DVD MEDIA, USB, SD
and iPod sources.