Kenwood DMX100BT, Инструкция по эксплуатации

Страница: 15 / 52

15 English |
Controlling General Audio
1
Press the <MENU> button.
2
Touch [SETUP].
3
Touch [Audio].
4
Touch [Speaker].
5
Set each item as follows.
[ C ] [ D ] Adjust the left and right volume balance. (L12
to R12)
[
R
] [
S
] Adjust the front and rear volume balance.
(F12 to R12)
[RESET] To clear the adjustment.
Ñ
Bass boost
1
Displays the any source control screen.
2
Touch [BASS].
Sets the amount of bass boost among “OFF” (gray)/
“ON” (white).
Equalizer Control
1
Press the <MENU> button.
2
Touch [SETUP].
3
Touch [EQ].
4
Set each item as follows.
1
3
2
1
To recall the preset equalizer curve.
2
You can select frequency bar and adjust its level by
[+], [–]. (-9 to +9)
• The adjustments are stored and “User” is activated.
3
The current EQ curve returns to flat.
Subwoofer settings
1
Press the <MENU> button.
2
Touch [SETUP].
3
Touch [Audio].
4
Touch [Subwoofer].
5
Set each item as follows.
Activates of deactivate the subwoofer.
Level Adjusts the subwoofer level. (-6 to +6)
LPF Low Pass Filter adjustment.
Slope Sets a crossover slope.
[RESET] To clear the adjustment.
Controlling Audio