Controlling Audio
71
English
Controlling Audio
You can adjust various settings such as audio
balance or subwoofer level.
1
Press the
[
]
/
[
MENU
]
button.
h
h
Popup menu appears.
2
Touch
[
Audio
]
.
See the following section for each
setting.
• Set up speaker / X’over (P.72)
• Controlling equalizer/ subwoofer level
• Set listening position / DTA (P.77)
• Controlling general audio (Fader /
Balance) (P.73)
• Set volume offset (P.75)
• Performing zone control (P.75)
• Set sound effect (P.76)
• Memory/recall the audio settings
3-way speaker system setup
(DDX6906S/ DMX706S)
Select the appropriate crossover network
mode for the speaker system used (2-way or
3-way speaker system).
1
Press the
[ ]
/
[
HOME
]
button.
h
h
HOME screen appears.
2
Touch
[
]
.
h
h
Source selection screen appears.
3
Touch
[
STANDBY
]
.
4
Press the button
1
followed by the
button
2
for 1 second at the same time.
DDX6906S
2
1
DMX706S
1
2
h
h
Speaker system select screen appears.
5
Select the crossover network mode.
h
h
A confirmation screen appears.
6
Touch
[
Yes
]
.
NOTE
• When the 3-way speaker system is selected, the
following functions are disabled.
– Front focus of Listening Position / DTA
– Fader for Controlling General Audio
– Zone Control
– Selection of the speakers to output sound from
the cell-phone of Bluetooth HF/Audio
– Beep for User Interface Setup
• Connecting 3-way speakers with the 2-way mode
selected can break the speakers.
