Kenwood CL620 series, Руководство пользователя

Страница: 5 / 12

before using your Kenwood
appliance
●
Read these instructions carefully and
retain for future reference.
●
Remove all packaging and any
labels.
safety
●
Switch off and unplug:
● ●
before fitting and removing parts
● ● after use
● ● before cleaning.
●
Never immerse the
base/paddle assembly or
allow its underside to get wet.
Dry thoroughly before use.
●
Do not overfill as hot liquid may
splash out during the blending
operation.
●
Never let the power unit, cord or
plug get wet.
●
Keep hands and utensils out of the
goblet when it’s on the power unit.
●
Never use a damaged appliance.
Get it checked or repaired : see
‘service’.
●
Never use an unauthorised
attachment.
●
Never leave the appliance on
unattended.
●
When removing the goblet from the
power unit, wait until the paddle has
completely stopped.
●
Do not operate the appliance whilst
the goblet is empty.
●
Only operate the appliance with the
lid in place.
●
Only use the power unit supplied
and keep it clean and dry.
●
Beware, the appliance will get hot
during operation. Always remove the
lid using the plastic finger grip.
●
Keep small children away from the
appliance and never let the cord
hang down over the worktop edge -
a small child could grab it and pull
the appliance down.
●
Take care when drinking liquids as
they will be hot.
●
Keep hot drinks out of childrens
reach.
●
Don’t drink while holding your baby.
If you’re passing someone a drink,
make sure a child isn’t underneath.
●
Do not let infirm people use the
appliance without supervision.
●
Do not let children use or play with
the appliance.
●
Only use the appliance for its intended
domestic use. Kenwood will not accept
any liability if the appliance is subject to
improper use, or failure to comply with
these instructions.
before plugging in
●
Make sure your electricity supply is
the same as the one shown on the
underside of the machine.
●
The machine complies with
European Economic Community
Directive 89/336/EEC.
before using for the first time
1 Wash the parts: see ‘cleaning’.
2 Wrap excess cord around the cord
storage device on the underside of
the appliance.
key
lid
goblet
tap assembly
base/paddle assembly
drive
power unit
heat and mix button
off button
frothy mix button
keep warm button
brush
to use your Frothie
Deluxe
1 Make sure the base/paddle
assembly and tap are correctly
assembled to the goblet, then place
on the power unit.
●
Check that the dispensing tap lever
is in the off position
.
2