Kenwood C-616DV, Инструкция по эксплуатации, Страница: 14 / 17

26
C-616DV English
27
Clock/timer operation
Timer setting
The system can switch on to DVD, USB, TUNER or iPod
automatically at a preset time, serving as an alarm to
wake you up.
Important!
Before setting the timer, ensure that the clock is
set correctly.
1
Press TIMER SET button.
2
Press MULTI CONTROL
2
or
3
button to select
"TIMER" and press ENTER button.
3
Set the time to start playback.
The icon "ON" starts fl ashing.
Press MULTI CONTROL
5
or
∞
button to set
timer start hours and press ENTER button to
store the setting. Repeat the same procedure to
set the minutes.
The icon "OFF" starts fl ashing.
4
Repeat the step 3 to set the time to stop the
timer (off time).
The icon "TIMER" fl ashes and the source display
appears.
5
Press MULTI CONTROL
5
or
∞
button to select
the desired source and press ENTER button to
store the setting.
The source switches as follows :
"DVD"
=
"USB"
=
"SD"
=
"TU FM"
=
"TU AM"
=
"iPod"
=
…
When a radio source (FM/AM) is selected, select the
preset station number after the above.
6
Press MULTI CONTROL
5
or
∞
button to set
volume level and press ENTER button to store
the setting.
7
Press MULTI CONTROL
2
or
3
button to select
the play mode and press ENTER button to store
the setting.
Play mode Function
PLAY The playback begins at the level set
with VOLUME.
AI PLAY The volume is increased gradually until
the level set with VOLUME.
When the setting completes, "COMPLETE" is
displayed and the unit exits the setup mode
automatically.
The icon "TIMER" appears on the display.
The timer is now set.
Clock setting
1
Press TIMER SET button.
2
Press MULTI CONTROL
2
or
3
button to select
"CLOCK" and press ENTER button.
"CLOCK SETTING" appears on the display.
3
Press ENTER button.
The hour indication starts fl ashing.
4
Press MULTI CONTROL
5
or
∞
button to set the
hours and press ENTER button.
The minute indication starts fl ashing.
5
Press MULTI CONTROL
5
or
∞
button to set the
minutes and press ENTER button.
When the setting completes, "COMPLETE" is
displayed and the unit exits the setup mode
automatically.
⁄
• The clock setting will be erased when the power cord is
disconnected or a power failure occurred.
• The MULTI CONTROL
2
or
3
button can be used to move
across the setting items.
8
Switch the system to standby mode.
The STANDBY/TIMER indicator also lights in orange.
⁄
• When reached the preset timer, the selected source will play
or switch to standby mode after the timer has been activated.
• The MULTI CONTROL
2
or
3
button can be used to move
across the setting items.
To activate/deactivate the timer
Press TIMER ON/OFF button.
If activated, the icon "TIMER" appears on the
display.
⁄
• The timer off will not be activated if the starting and stopping
time are the same.
Sleep timer setting
If the sleep timer is activated, the system will switch
to standby mode after the selected time has expired.
Each press of the SLEEP button decreases the timer
period by 10 minutes. The sleep timer can be set up
to 90 minutes.
The icon "SLEEP" appears on the display.
The display will change to sleep time display and
change as follows:
90 min
=
80 min
=
70 min
=
60 min
=
50 min
=
40 min
=
30 min
=
20 min
=
10 min
=
OFF
=
…
While sleep timer is in active:
To deactivate the sleep timer
Press SLEEP button or press button to turn the
power off .
⁄
• If timer off and the sleep off are all activated, the system will
switch to standby mode by the earlier timer set.
System setup
Adjusting the display brightness
(BACKLIGHT)
The brightness of the display backlight can be
adjusted and how the display backlight and
illuminations of this unit are lit can be selected.
1
Press BACKLIGHT/CONTRAST button.
2
Press MULTI CONTROL
2
or
3
button to select
"BACKLIGHT" and press ENTER button.
3
Press MULTI CONTROL
5
or
∞
button to select
the backlight setting and press ENTER button
to store the setting.
Setting Function
BACKLIGHT 1 Both the display and illuminations are
turned on.
BACKLIGHT 2 The display is turned on and the
illuminations are turned off.
BACKLIGHT 3 The display is turned off and the
illuminations are turned on.
BACKLIGHT 4 Both the display and illuminations are
turned off.
When the setting completes, "COMPLETE" is
displayed and the unit exits the setup mode
automatically.
Adjusting the display contrast
(CONTRAST)
The contrast of the display can be adjusted.
1
Press BACKLIGHT/CONTRAST button.
2
Press MULTI CONTROL
2
or
3
button to select
"CONTRAST" and press ENTER button.
3
Press MULTI CONTROL
5
or
∞
button to adjust
the contrast setting and press ENTER button to
store the setting.
Setting Function
1
&
Decreases the contrast.
2
&&
3
&&&
4
&&&&
5
&&&&&
Increases the contrast.
When the setting completes, "COMPLETE" is
displayed and the unit exits the setup mode
automatically.
Continued to next page
B60-5820̲08̲00̲C-616DV̲English.indd 26-27 09/10/01 15:12