blade assemblies
blender and multi mill
G
Remove the blade unit from the
goblet or mill by turning to the
unlock position
to release.
grinding and grating mills
G
Remove the lid from the blade
assembly.
1
blender/multi mill:
remove and
wash the sealing ring.
2 Don’t touch the sharp blades –
brush them clean using hot soapy
water, then rinse thoroughly under
the tap.
Don’t immerse the
blade unit in water.
3 Leave to dry upside down.
other parts
Wash by hand, then dry.
service and customer
care
G
If the cord is damaged it must, for
safety reasons, be replaced by
KENWOOD or an authorised
KENWOOD repairer.
If you experience any
problems with the operation
of the blender, before calling
for assistance refer to the
troubleshooting guide.
If you need help with:
G
using your appliance or
G
servicing or repairs
G
Contact the shop where you
bought your appliance.
G
Designed and engineered by
Kenwood in the UK.
G
Made in China.
IMPORTANT INFORMATION
FOR CORRECT DISPOSAL OF
THE PRODUCT IN
ACCORDANCE WITH EC
DIRECTIVE 2002/96/EC.
At the end of its working life, the
product must not be disposed of as
urban waste.
It must be taken to a special local
authority differentiated waste collection
centre or to a dealer providing this
service.
Disposing of a household appliance
separately avoids possible negative
consequences for the environment
and health deriving from inappropriate
disposal and enables the constituent
materials to be recovered to obtain
significant savings in energy and
resources. As a reminder of the need
to dispose of household appliances
separately, the product is marked
with a crossed-out wheeled dustbin.
11