Kenwood BL710 series, Инструкция по эксплуатации

Страница: 5 / 133

general safety
●
Switch off and unplug:
● ●
before fitting or removing
parts;
● ●
when not in use;
● ●
before cleaning.
●
Never fit the blade unit to
the power unit without the
blender goblet or mill jar
fitted.
●
Always unplug the appliance
before putting your hands or
utensils in the goblet.
● Always take care when handling
the blade assembly and avoid
touching the cutting edge of the
blades when cleaning.
●
Only operate the blender with
the lid and filler cap in place.
2
Use your blender for soups,
drinks, pâtés, mayonnaise,
breadcrumbs, biscuit crumbs,
chopping nuts and crushing ice.
Use your mill (if supplied) for
milling herbs, nuts, coffee beans
and purées. before using your
Kenwood appliance
●
Read these instructions carefully
and retain for future reference.
●
Remove all packaging and any
labels.
●
Wash the parts: see ‘care and
cleaning’.
safety
IMPORTANT: HOT BLENDING
INSTRUCTIONS
To minimise the possibility of scalding when blending hot ingredients
keep hands and other exposed skin away from the lid to prevent
possible burns. The following precautions must be observed:
●
CAUTION: Blending very hot liquids may result in hot
liquid and steam being forced suddenly past the lid or
filler cap
���
.
●
We recommend that hot liquids are allowed to cool
before blending.
●
NEVER exceed 1200ml / 5 cups capacity if processing hot liquids,
such as soups (refer to the markings on the goblet).
●
ALWAYS commence blending at a low speed and gradually
increase the speed. NEVER blend hot liquids by using the Pulse
setting.
●
Liquids which tend to foam such as milk, should be limited to a
maximum capacity of 1000ml/4 cups.
●
Take care when handling the blender as the goblet and its contents
will be very hot.
●
Take particular care when removing the lid. The lid is designed to
be a tight fit to prevent leakage. If necessary protect your hands
with a cloth or oven gloves when handling.
●
Ensure the goblet is securely attached to the base and when
removing from the appliance, guide the base and ensure it is
removed together with the goblet.
●
Ensure that the lid and filler cap are securely in place before every
blending operation.
●
Always ensure that the vents in the filler cap are clear before every
blending operation 햻 .
●
When fitting the lid to the goblet always ensure that the lid and
goblet rim are clean and dry to ensure a good seal and prevent
spillage.