5.8. Visual and acoustic signaling
AlarmManager
LED-POWER/ALARM:
Lights after connection to the power supply
RED/GREEN toggle in case of an alarm
MultiSensor-RF / -LAN / -LAN-RF
LED-POWER/ALARM:
Lights if MultiSensor is powered and function is OK
RED/GREEN toggle in case of an alarm
Constant:
MultiSensor is armed
MultiSensor-RF / -LAN / -LAN-RF and AlarmManager
BUZZER:
Alternating:
Arm delay is running.
Delay is depending on configured time in the alarm zone settings.
Constant of 1 Second:
System has been disarmed.
Constant of 3 Seconds:
Arming was not executed - alarms are existing. Please check
external alarm inputs on AlarmManager or MultiSensor.
MultiSensor-Door
Normal operation mode:
LED-RED:
blinking 1x in case of alarm
LED-GREEN:
OFF
BUZZER:
1x short in case of alarm (if acoustic signalization is active)
Teach-In process:
LED-RED:
OFF
LED-GRÜN:
long blinking: Teach-In process started
ON: Teach-In process completed
BUZZER:
1x long when pressing and holding down the teach-in button
for approx. 3 seconds (start of teach-in process)
Page
(07-2018, subject to change)
kentix.com
16
Al
a
rmMa
n
a
g
e
r
Sm
a
rt
Mo
n
ito
ri
n
g
