8.2 RS232 Control
Preparation before control
Connect the computer serial communication port and the matrix RS232 communication
port through straight line RS232 . After application software is installed, you can use the
computer to control the matrix.
Here take SSCOM32 as an example to explain.
Software installation method:
copy control software to normal connection control
device.
Software uninstall method:
delete the overall folder where the control software is.
Basic setting:
Install RS232 software on the computer, double-click the installation package in the
software running icon (as shown in Figure 8.2.1)
Fig8.2.1 SSCOM32 Software icon
Open RS232 software, the main interface as shown below 7.2.2:
