23
Reversing Door Swing
Reattaching the door
“T” SLOT IN
FRONT PANEL
“T” POST ON
DOOR HINGE
1. Holding the door in both hands, squarely insert the “T”
post on the back of the hinge into the “T” slot on the
front panel and lower it to align the mounting holes.
3. Close the door and test operation of hinge, strike and
latch.
2. While supporting the door, install the upper pan head
screw
fi
rst and then the lower one.
NOTE
Correctly installed hinge screws will press hinge
fl
ush to
front panel. Any gap between hinge and front panel will
cause misalignment of strike to latch.
