Kenmore 795.78752.801 страница 6 Скачать руководство пользователя

Страница: 6 / 56

3. DISASSEMBLY

- 6 -

3-1 REMOVING AND REPLACING REFRIGERATOR DOORS

(1)

(2)

(4) (5)

(6)

(3)

To remove the left refrigerator door:

Pull the water tube out of the fitting while pressing the

release ring on the fitting.

When you pull out the tube, first you have to push the
collet by opposite direction of arrow in the upper picture
and tube pull out by direction of arrow.

To remove the right refrigerator door:

¥ Open the door. Remove the top hinge cover screw (1).

Lift up the cover (2).

¥ Remove the cover.
¥ Disconnect the wire harness (3).

¥ Rotate the hinge lever (4) clockwise and remove.

Lift the top hinge (5) free of the hinge lever latch (6).

IMPORTANT:

When lifting the hinge free of the latch, be

careful that the door does not fall forward.

Explosion Hazard

WARNING

¥ Disconnect electrical supply to the refrigerator

before installing. Failure to do so could result in

death or serious injury.

¥ Do not put hands or feet or other objects into the

air vents, base grille, or bottom of the refrigerator.

You may be injured or receive an electrical shock.

¥ Be careful when you work with the hinge, base

grille, and stopper. You may be injured.

¥ Open the door. Remove the top hinge cover screw (1).
¥ Use a flat-head screwdriver to pry back the hooks

(not shown) on the front underside of the cover (2).

Lift up the cover.

¥ Remove the cover. Pull out the tube (3).

¥ Disconnect all the wire harnesses (4).

¥ Remove the grounding screw(5)
¥ Rotate hinge lever (6) counterclockwise and remove.

Lift the top hinge (7) free of the hinge lever latch (8).

IMPORTANT:

When lifting the hinge free of the latch,

be careful that the door does not fall forward.
¥ Lift the door from the middle hinge pin and remove

the door.

¥ Place the door, inside facing up, on a nonscratching

surface.

(1)

(2)

(4)

(3)

(6)

(7)

(8)

(5)

CAUTION :

Before you begin, remove food and

bins from the doors.

Содержание 795.78752.801

























































Результаты поиска

Содержание 795.78752.801

Отзывы:

Похожие инструкции для 795.78752.801

Бренды по названию

Популярные бренды

Kenmore 795.78752.801, Руководство по обслуживанию

Результаты поиска

Содержание 795.78752.801

Отзывы:

Похожие инструкции для 795.78752.801

Бренды по названию

Популярные бренды