Kenmore 795.74092.41 Series, Руководство по обслуживанию

Страница: 13 / 112

- 13 -
1) Remove filter cover to turn counterclockwise about 30
degree.
2) Remove old air filter from filter cover. Install new air filter
in filter cover to see “FRONT”
3) FIlter cover put on multi duct inposition, And turn air filter
clockwise about 30 degree.
3-10 MAIN PCB
1) Remove 3 screws on the PCB cover.
2) Remove the PCB cover
3) Disconnect wire harness and replace the main PCB in
the reverse order of removal.
WARNING : Unplug the refrigerator before removing the
control board.
PCB Cover
CAUTION: When replacing the dispenser cover, be
careful that the lead wire in not exposed and the water
tube is not pinched by the dispenser cover, as shown in
the picture below.
3-9 Air Filter
3-11 DISPENSER COVER DISASSEMBLY
Hold the bottom of the
dispenser and pull out
from the door foam.