4
DISHWASHER LOADING TIPS
NOTE:
Features are model specific. Your dishwasher may not have all features described. See Quick Start Guides for possible
dishwasher loading patterns for all dish racks.
Silverware Baskets
Use silverware basket lids to provide optimal spacing and best
cleaning performance.
NOTE:
If your silverware does not fit into the designated slots,
open the lids (Style 1/3) or lift on the ends of the lids and pull to
remove (Style 2). Mix silverware types to keep them separated.
Load knives down, forks up, and alternate spoons for best
cleaning results.
Removing Upper Racks
In order to make space for tall items, your upper racks are
removable. The manner in which to remove will depend on
whether the rack is mounted with Style 1 or Style 2. Remove
dishes prior to removing any racks.
To remove the rack, pull the rack forward about halfway out of
the tub. On one side, press the tab on the track in and pull up
the front end of the rack, out of the track. Then repeat this step
on the other side to completely remove the front end of the rack.
Then remove the rack by pulling the back end out using a forward
and upward motion.
To replace the rack, Push back of rack into rail first and then push
front down.
To remove the rack, pull the rack out until it stops. On the left and
right side of the rack, push the plastic track stops on the front of
the rail sideways to open them. Pull out the rack.
To replace the rack, push the rack back onto the rails. Push the
track stops closed.
Sliding Bowl Tines
The sliding bowl tines allow you to easily load bowls of multiple
sizes. Grab the moveable tine row in the lower rack and slide into
the desired position.
Fold Down Tines
Fold down tines allow you to optimize the spacing in the rack.
Fold down tines might be in the lower rack , the second level rack
and/or third level rack depending on your model. To fold or unfold
the tine, hold the tine nearest the clip at the end of the tine row
and gently push it past the stop on the clip and in the direction
you want to fold it.
Stemware Holder
Use the stemware holders to support wine glasses and other
stemware. Push them up to rotate them out of the way when not
needed.
Cup Shelf
Use the cup shelf to hold additional cups or small items. Push up
to fold out of the way when not needed.
Style 1
Style 2
Style 1
Style 2
Stemware
Holder
Rack
Track Stop
Style 3
