Kenmore 664.7511 Series, Инструкция по использованию и уходу

Страница: 6 / 64

6
FEATURE GUIDE
This Use and Care Guide covers several models. Your model may have some or all of the items listed. Refer to this Use and Care
Guide for more detailed instructions. You can find your model number and serial number on the label, located on the oven frame
behind the top side of the oven door.
WARNING
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.
Keypad Feature Instructions
CLOCK Clock The Clock uses a 12-hour cycle.
1. Check that the oven is OFF.
2.
Press CLOCK.
3. Press the Temp/Time “up” or “down” arrow keypad to set the hours. Press CLOCK
to switch to the minutes. Press the Temp/Time “up” or “down” arrow keypad to set
the minutes.
4.
Press CLOCK or START.
LIGHT Oven cavity light While the oven door is closed, press LIGHT to turn the light on and off. The oven light
will come on when the oven door is opened. The oven light will not come on during the
Self-Cleaning cycle.
TIMER SET/OFF Oven timer The Timer can be set in hours or minutes up to 9 hours and 59 minutes.
1. Press TIMER SET/OFF.
2.
Press the Temp/Time “up” or “down” arrow keypad to set the length of time.
3. Press START to begin the countdown. If enabled, end-of-cycle tones will sound at
end of countdown.
4. Press TIMER SET/OFF to cancel the Timer. Do not press CANCEL because the oven
will turn off.
START Cooking start The Start keypad begins any oven function. If Start is not pressed within 5 seconds,
a tone will sound and Start will blink until pressed or canceled. If Start is not pressed
within 1 minute after pressing a keypad, the function is canceled and the time of day
is displayed.
CANCEL Range function The Cancel keypad stops any function except the Timer and Oven Control Lockout.
TEMP/TIME Temperature and
time adjust
The Temp/Time “up” and “down” arrow keypads are used to adjust time and
temperature settings.
BAKE Baking and
roasting
1. Press BAKE.
2. Press the Temp/Time “up” or “down” arrow keypad until desired temperature is
reached. A tone will sound if the minimum or maximum temperature is reached.
3. Press START.
4. To change the temperature, repeat Step 2. Press START.
5. Press CANCEL when finished.