Kenmore 146.47223610, Инструкция по использованию и уходу

Страница: 25 / 64

146.47223610 • 25
Side burner
□
Loosen side burner in side shelf. (B ). To loosen, unscrew and remove two front screws and washers
holding side burner in place. (A). Note: Do not loosen electrode screw.
□
Remove the 2 pre-installed screws from the valve stem and set them aside. (C)
□
Insert valve stem through hole in fascia. (D). Install previously removed 2 screws .Note: Do not tighten
these 2 screws until the bezel is attached to fascia and valve face.(E).
□
Insert bezel openings over valve stem and the 2 screws(F). Slide bezel down onto screws. Make sure
that black mark on bezel is vertical. Tighten the 2 screws to secure bezel to fascia(G).
□
Place side burner tube over the valve, making sure that valve is inside side burner tube. (H)
□
Push control knob onto side burner valve stem. (I)
□
Reattach side burner to side burner shelf with the 2 previously removed screws. Replace side burner
grate. (J)
□
Connect both igniter wires to the igniter module on the inside of the right fascia. To connect, push
igniter wire tips onto pins in igniter module.(K)
□
Unscrew igniter cap from control panel. Insert (1) AAA battery (provided in blister pack) into battery
slot with positive end (+) facing outward. Screw igniter cap back onto panel. (L)
A
C
F E
H
A B
D