Kenmore 111 страница 41 Скачать руководство пользователя

Страница: 41 / 46

ICE & WATER

Problem

Possible Causes

Solutions

Icemaker is not

making enough ice

(continued).

Tubing connecting refrigerator to

house supply valve is kinked.

The tubing can kink when the refrigerator is moved

during installation or cleaning resulting in reduced water

flow. Straighten or repair the water supply line and

arrange it to prevent future kinks.

Doors are opened often or for long

periods of time.

If the doors of the unit are opened often, ambient

air will warm the refrigerator which will prevent the

unit from maintaining the set temperature. Lowering

the refrigerator temperature can help, as well as not

opening the doors as frequently.

Doors are not closed completely.

If the doors are not properly closed, ice production

will be affected. See the Doors will not close

completely or pop open section in Parts & Features

Troubleshooting for more information.

The temperature setting for the

freezer is too warm.

The recommended temperature for the freezer

compartment for normal ice production is 0°F. If the

freezer temperature is warmer, ice production will be

affected.

Dispensing water

slowly.

Water filter has been exhausted.

It is recommended that you replace the water filter:
Approximately every six months.

• When the water filter indicator turns on.

• When the water dispenser output decreases.

• When the ice cubes are smaller than normal.

Low house water supply pressure.

NOTE:

The water pressure must be from 30 to 125 psi

or 207-862 kPa or 2.1-8.8 kgf/cm

. If the refrigerator

is installed in an area with low water pressure below

30 psi, you can install a booster pump to compensate

for the low pressure.

If the problem persists, it may be necessary to contact

a plumber or install a booster pump to compensate

for the low pressure.

Not dispensing ice.

Doors are not closed completely.

Ice will not dispense if any of the refrigerator doors

are left open.

Infrequent use of the dispenser.

Infrequent use of the ice dispenser will cause the cubes

to stick together over time, which will prevent them

from properly dispensing. Check the ice bin for ice

cubes clumping/sticking together. If they are, break up

the ice cubes to allow for proper operation.

The delivery chute is clogged with

frost or ice fragments.

Eliminate the frost or ice fragments by removing the

ice bin and clearing the chute with a plastic utensil.

Dispensing cubed ice can also help prevent frost or ice

fragment buildup.

The dispenser display is locked.

Press and hold the Lock button for three seconds to

unlock the control panel and dispenser.

Ice bin is empty.

It may take up to 24 hours for each compartment to

reach the desired temperature and for the icemaker

to begin making ice. Make sure that the shutoff (arm/

sensor) is not obstructed.

Once the ice supply in the bin has been completely

exhausted, it my take up to 90 minutes before

additional ice is available, and approximately 24

hours to completely refill the bin.

TROUBLESHOOTING GUIDE

FDR 30Cuft_UCG(영+스)(Kenmore)_F840-1.indd 41

2020-02-26 오전 11:53:59

Содержание 111















































Результаты поиска

Содержание 111

Отзывы:

Похожие инструкции для 111

Бренды по названию

Популярные бренды

Kenmore 111, Инструкция по использованию и уходу

Результаты поиска

Содержание 111

Отзывы:

Похожие инструкции для 111

Бренды по названию

Популярные бренды