12
13
HOW TO REMOVE FREEZER DOOR HANDLE
NOTE:
Handle appearance may vary from the
illustrations on this page.
Removing Freezer Drawer Handle
Loosen the set screws located on the lower side of
the handle with the hex key provided and remove
the handle.
HOW TO REPLACE FREEZER DOOR HANDLE
NOTE:
Handle appearance may vary from the
illustrations on this page.
Replacing Freezer Drawer Handle
Place the handle on the door by fitting the
handle footprints over the mounting fasteners and
tightening the set screws with a hex key.
NOTE
: If the handle mounting fasteners need to be
tightened or removed, use a ¼ in. Allen wrench.
WARNING
When assembling or disassembling the handles:
• Grasp the handle firmly to ensure it will not drop or
cause injury.
• Prevent the handle from swinging toward nearby
people or animals.
• Insert the handle footprints over the door mounting
fasteners and tighten the hex screws to fix the handle
in place.
• Check for any gap between the door and handle after
the handle is fixed in place.
NOTE:
Removing the doors is always recommended when it is necessary to move the refrigerator through a narrow
opening. If it is necessary to remove the handles, follow the directions below.
REFRIGERATOR INSTALLATION
F706-4(영)(Kenmore)_신포맷.indd 13
2016-08-29 오후 3:36:39