15
REVERSING THE DOOR SWING (continued)
3
Remove the two hinge covers
Use a flat-head screwdriver to remove the two hinge
hole covers from the cabinet side. Reattach the covers
over the exposed hinge holes on the opposite side of
cabinet.
4
Remove the inner door frame.
Locate and remove the 10 screws around the door
edges as shown. Use a flat blade screwdriver to pry
loose and lift off the inner door frame. Remove the
door hook latch and latch hole cover and reinstall
each on the opposite side from which removed.
5
Reverse door hinges and hinge covers.
Reinstall the door hinges and hinge covers on the
opposite sides from which they were removed.
6
Remount the inner door frame.
With the door hinges and hinge covers in the new
locations, remount the inner door onto the outer door
with the screws removed in step 4.
WARNING:
Be sure to support the weight of door before
Installing the hinge screws.
7
Reinstall the door
While supporting the door, install the 4 hinge screws
removed in step 2. Test the swing of the door to make
sure the door hinges and door latch are properly
aligned and that the door opens, closes, and latches
properly.
INSTALLATION INSTRUCTIONS
Door
Latch
Latch Hole
Cover
Inner
Door
Door
Hinge
Hinge
Cover
Outer
Door
Kenmore(북미향 건조기) 111.6914#(EN).indd 15
2021-06-09 오전 10:35:35
