background image

5

Side View

1

3

/

4

"

(44 mm)

36"

(914 mm)

20

3

/

4

"

(527 mm)

Back View

1

3

/

4

"

(44 mm)

3

1

/

4

"

(83 mm)

3

1

/

2

"

(89 mm)

11

7

/

8

"

(303 mm)

29

1

/

4

"

(743 mm)

Minimum spacing for recessed area  

and closet installation

The following dimensions shown are for the minimum spacing 

allowed when the dryer is to be operated with, or without, the 

Stack Stand Kit. To purchase a Stack Stand Kit, see the back cover. 

 

Additional spacing should be considered for ease of installation 

and servicing.

 

Additional clearances might be required for wall, door, and 

floor moldings.

 

For closet installation with a door, minimum ventilation 

openings in the top and bottom of the door are required. 

Louvered doors with equivalent ventilation openings  

are acceptable.

 

Companion appliance spacing should also be considered.

Recessed or closet installation – Dryer only

18"

(457 mm)

5

1

/

2

"*

(140 mm)

14" max.

(356 mm)

3"

(76 mm)

3"

(76 mm)

24 in.

2

(155 cm

2

)

48 in.

2

(310 cm

2

)

1"

(25 mm)

1"

(25 mm)

Recessed or closet installation – Stacked

3"

(76  mm)

3"

(76 mm)

24 in.

2

(155 cm

2

)

48 in.

2

(310 cm

2

)

1"

(25 mm)

1"

(25 mm)

12"

(305 mm)

12"

(305 mm)

5

1

/

2

"*

(140 mm)

3"

(76 mm)

* Most installations require a minimum 5½" (140 mm) clearance  

behind the dryer for the exhaust vent with elbows. See “Venting  

Requirements.”

Mobile Home – Additional Location Requirements

This dryer is suitable for mobile home installations. The installation 

must conform to the Manufactured Home Construction and Safety 

Standard, Title 24 CFR, Part 3280 (formerly the Federal Standard 

for Mobile Home Construction and Safety, Title 245, HUD Part 

280) or Standard CAN/CSA-Z240 MH.

Mobile home installations require:

 

Metal exhaust system hardware, which is available for 

purchase from your dealer.

 

Special provisions must be made in mobile homes to introduce 

outside air into the dryer. The opening (such as a nearby 

window) should be at least twice as large as the dryer  

exhaust opening.

Closet door with vents

Recessed area

Closet door with vents

Recessed area

DRYER

WASHER

Содержание 110.84422610


















Отзывы: